This is an anodised aluminium pickguard for the Fender® Jazzmaster® and similar guitars, Completely as standard, with the rhythm control circuit routing and the oversized holes to accommodate Jazzmaster® pickups

Please note, these are not official Fender® parts.

This is a pickguard for the Fender® Japan Jaguar® and similar guitars, Completely as standard, with the rhythm control circuit routing and the oversized holes to accommodate Jaguar® pickups. This plate features a 'square' shaped neck pocket.

Please note, these are not official Fender® parts.

This is a pickguard for the Fender® USA Jaguar® and similar guitars, Completely as standard, with the rhythm control circuit routing and the oversized holes to accommodate Jaguar® pickups

Please note, these are not official Fender® parts.

This is a pickguard for the Fender® Japan Jaguar® and similar guitars, Completely as standard, with the rhythm control circuit routing and the oversized holes to accommodate Jaguar® pickups. This plate features a 'rounded' neck pocket.

Please note, these are not official Fender® parts.

This is a pickguard for the Fender® Jazzmaster® and similar guitars, Completely as standard, with the rhythm control circuit routing and the oversized holes to accommodate Jazzmaster® pickups

Please note, these are not official Fender® parts.

This is a pickguard for the Fender® Jazzmaster and similar guitars, allowing you to replace the standard pickups with normal humbuckers, opening up a whole range of new options.

Please note, these are not official Fender® parts.

(1)

Suitable for a Fender® Mustang® Bass
Please note, these are not official Fender® parts.

This is a pickguard for the Fender® Mustang® Cyclone® Conversion and similar guitars.This pickguard is a great way to turn your Fender® Mustang® into something a little more suited to the rock and grunge animal that made it famous - taking heavy inspiration from another 90s Fender® model, the oft lamented Cyclone® 1, we've ditched the single coil in the bridge, and replaced it with an open humbucker.

Please note, these are not official Fender® parts.

This is a pickguard for the Fender Mustang and similar guitars, ideal for breathing a bit of life into an old guitar.

Please note, these are not official Fender® parts.

Available in Black Silver Inlays, and suitable for the Telecaster Deluxe and Custom

Supplied singly (Vol or Tone) or in a set of 4 (2 Vol and 2 Tone)

(1)

This is a conversion plate for the Fender® Jaguar® (specifically the USA model) routed for use with a toggle switch, as a way of simplifying the switching.

This is an Aluminium grounding plate for the Fender® Jazzmaster® - designed to sit between the body and the pickguard.

It acts as a fail safe (or complete replacement) for the grounding wires between the pots, switches and jack socket, and it also, potentially, acts as a very effective shield against external interference.

Please note, these are not official Fender® parts.

Available in Black, With Gold or Silver Inlays.
Supplied in a set of 4 (2 Vol and 2 Tone) or as a single knob

This is a "conversion" part - pretty straight forward really - its a humbucker ring internally, but the external "shape" is that of a Jazzmaster® pickup route.

This is the switch control plate for the Fender® Jaguar®.

This is the control plate for the USA and Mexican Fender® Mustang guitars.

They do, occasionally, turn up on other models, produced outside of of those regions (Squier® commonly use this spec), and somewhat frustratingly, some USA/Mex/Squier models will use the Japanese Spec control plate.

Please note these are not official Fender® parts.

This is one of the control plates you will need for the Fender® Jaguar®. Fulfilling a purely functional role in the grand scheme of things, it is simply there to provide mounting for the volume and tone controls as well as the jack socket.

This is the control plate for the Japanese Fender® Mustang guitars.
They do, occasionally, turn up on other models, produced outside of Japan, but, its fairly safe to think of them as “specifically for Japanese models” because, seemingly those guitars never use any other version of the control plate.

These UFO knobs are actually a universal fit, and lack the internal teeth of cheaper models - they can be fitted to either Imperial or Metric pots, as long as they're split shaft - they will fit! Available in a wide selection of colours, both in the actual knob colour, and the font colour

Please note not supplied with grounding plate or mounting screws.

This is a Steel control plate, immaculately plated, to fit a Fender® Mustang® Bass

The Roller knob used on Fender® Jazzmaster and Jaguar® guitars.

These are a "second" type of pickguard screw, which seems to be a proprietry design, specific to some (but not all) Fender® guitars - and, honestly? They're a bit of a nightmare to explain.

This is the switch control plate for the Fender® Jaguar®.

The Pot bracket used to mount the side loading pots on the Fender® Jaguar®

The Pot bracket used to mount the side loading pots on the Fender® Jazzmaster®

1 x Mustang Pickup Cover

These are our basic “accessory mounting screws” that we  use on everything from scratch plates right through to jack sockets. For  simplicities sake, we just call them pickguard screws, but they really do a  multitude of jobs on a guitar.