This is a full kit for making the pickups for a 5 String Fender Jazz Bass or similar guitar
This is a full kit for making the pickups for a Fender P Bass or similar guitar
A Large bass bridge pickup cover – Released with the original as a companion part to the metal “over string” pickup cover.
These Alnico 5 pole pieces are exactly the same as we use on our single coil pickups, but in the wider 1/4" size, but we're providing them un-magnetised to allow for full customisation.
Pickup Cover Suitable For Jazz Bass®. Please note, these are not official Fender® parts.
Flat topped pole pieces, 17.5mm x 4.75mm, ideal for making replacement pickups for the Telecaster.Available in Alnico 5.
Flat topped pole pieces, 17.5mm x 5mm, ideal for making replacement pickups for the Telecaster.Available in Alnico 2, 3, 4 and 5.
These Alnico 5 pole pieces are exactly the same as we use on our single coil pickups, but we're providing them un-magnetised to allow for full customisation.
Alnico Rod magnets, suitable for Stratocaster pickups - available in alnico 5. These are a staggered set, consisting of 6 poles, with a light, vintage bevel.
Flat topped pole pieces, 12mm x 5mm, ideal for Jazzmaster® style pickupsAvailable in Alnico 2, 3, 4 and 5.
Alnico Rod magnets, suitable for Stratocaster pickups - available in alnico, 2, 3, 4 and 5. These are a staggered set, consisting of 6 poles, with a light, vintage bevel.
Supplied as a Pair (one top, one bottom) - ideal for making replacement pickups for the Fender® 5 String Jazz® Bass or similar guitars.
Please note, these are not official Fender® parts.
Set of four 3/4 Thread, Phillips, Dome head Screws designed to screw into a guitar body/nut and hold a Bass pickup or P90 against its supporting springs/Foam. Available in Chrome, Black or Gold.
Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass
When we're dealing with surface mounting pickups, traditionally, there will be some relatively hard, close celled foam underneath which will give some level of height adjustment - its certainly not variable as "hanging" pickups, with the bolts and springs, but its fairly common - The Jazzmaster®, Jaguar®, Precision® and Jazz® Bass, as well as most P90s will employ sponges.