Brass Standoffs, used to assemble fibre boards where the final pole piece, will be a 5/40 UNC threaded bolt - ideal of P90s.

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 49.2mm, 50mm and 52mm.

Mount screw used to fix the base plate to a P90 bobbin, the base plate to single coils and Telecaster pickups, and various other jobs on the guitar.

P90 Spacer
Black PVC Spacer suitable for Soap Bar or Dog Ear P90

Our Soap Bar P90 bases, ideal for building your own guitar pickups, or replacing damaged stock parts. Available in brass and nickel

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

P90 Bobbin

Set of four  3/4 Thread, Phillips, Dome head Screws designed to screw into a guitar body/nut and hold a Bass pickup or P90 against its supporting springs/Foam. Available in Chrome, Black or Gold.

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

A pair of Fiber boards to make standard sized P90s.

Soapbar P90 Covers, made from gloss PVC plastic, available in Black and Ivory/Cream and 47.5 and 50mm pole spacings.

Gibson Sized Soapbar P90 Covers, made from gloss PVC plastic, available in Black and Ivory/Cream with 49.2mm pole spacings.

Soap Bar P90 covers made from German Silver/Nickel - currently only
available in unplated/raw finish - a great addition to any pickup!

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a P90! Be it a Soap Bar, a Dog Ear, or for an Epiphone Casino!