We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This is a full kit to make one Rail Humbucker pickup, suitable for the bridge position on a Telecaster®, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M5 poles, rather then the M3 poles found on the "traditional" humbuckers - this is an important consideration on nailing that modern Wide Range tone.

This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a Humbucker sized P90!

Our Fat Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M3 poles, rather then the M5 poles found on the "modern" version - this is a way to get a traditional humbucker tone from a Wide range route, NOT a way to get a modern wide range tone.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

This kit is a little more restircted then out normal humbucker kit (where you can pretty much build anything you can dream up!) - and that's completely intentional. This kit is designed to replicate one of the original humbuckers, warts and all.

So please bare in mind, that this kit only comes with the long leg bases, 5-40 UNC bolts, 6 screw poles, 6 slugs, and a base to accept them (the holes in the base are threaded for the pole screws) - its also only available in the 49.2mm spacing, as correct for the period.

These are, officially, a "Extended Range, Fan Fret, Slanted Humbucker Base" - which, as well as being a bit of a mouthful, because they turn up on fan frets that aren't extended range, and, presumably, turn up on extended range guitars that aren't fan fret!... but you get the idea.

Essentially, these things turn "normal" humbuckers into slated humbuckers, which turn up on those wonderfully wacky guitars, purely to keep the pickup "where it should be" in relation to the string/its vibration.

These are, officially, a "Extended Range, Fan Fret, Slanted Humbucker Base" - which, as well as being a bit of a mouthful, because they turn up on fan frets that aren't extended range, and, presumably, turn up on extended range guitars that aren't fan fret!... but you get the idea.

Essentially, these things turn "normal" humbuckers into slated humbuckers, which turn up on those wonderfully wacky guitars, purely to keep the pickup "where it should be" in relation to the string/its vibration.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Our thin Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

At first glance, this kit looks near identical to our "normal" humbucker kits when speced up with 12 hex poles BUT this is actually different.

With the normal kit, the 12 screw pole option comes with M3 (or 5/40) bolts, which thread into the specific screw side bobbins, where this kit is supplied with M5 hex bolts, which are designed to thread into the "slug" side bobbin.

At first glance, this kit looks near identical to our "normal" humbucker kits when speced up with 12 hex poles BUT this is actually different.

With the normal kit, the 12 screw pole option comes with M3 (or 5/40) bolts, which thread into the specific screw side bobbins, where this kit is supplied with M5 hex bolts, which are designed to thread into the "slug" side bobbin.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

A slightly strange take on a humbucker, here we have a SLANTED version - made popular originally on the Gibson Nighthawk, and more recently on fan fret guitars - the slanted humbucker offers a slightly more "quirky" look then the traditional type. Beyond the base, all the parts are identical thankfully.

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Magnetic spacers are a novel little idea, and turn up sporadically on production pickups every so often. Essentially, they replace the inert maple or plastic spacers either side of a Humbuckers poles to alter the tone, usually by making a pickup more aggressive.

These are an alternative to the standard H gate covers we offer. Obviously taking heavy inspiration from the Filtertron® pickups that turn up in that "semi mini" Humbucker size, and leaning on the style made popular by TV jones® - they're a nice part for making a pickup look a little more old fashioned than it maybe would with other styles of cover.

7 string humbucker covers - made from German Silver for minimal tonal colouring, immaculately plated in Chrome, Gold, Black, Nickel or in a beautiful unplated finish, and ideal for making your humbuckers into something a bit special.

7 string humbucker covers - made from German Silver for minimal tonal colouring, immaculately plated in Chrome, Gold, Black, Nickel or in a beautiful unplated finish, and ideal for making your humbuckers into something a bit special.

7 string humbucker covers - made from German Silver for minimal tonal colouring, immaculately plated in Chrome, Gold, Black, Nickel or in a beautiful unplated finish, and ideal for making your humbuckers into something a bit special.

These covers are identical to our "normal" humbucker covers, with one weird difference.

Where a "normal" modern cover is the "colour" electroplated onto a thin layer of copper, which has been electroplated onto the base material (simply to give a higher quality finish - copper being more reactive then either brass or nickel)

Available in a range of colours, these covers are both open and traditional, and come in 50mm or 52mm spacing

These closed face covers feature a raised double 'Rail' design, offering a sleek, robust look in a range of colours.

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.