Control Plate - Suitable For Telecaster® - 32mm Wide
A standard control plate for the Telecaster®, with a standard switch slot, and two pot holes large enough to take CTS pots. Fantastically well finished, with a high level of electroplating.
Prices From: £6.91 Inc VAT
Control Plate - Suitable For Telecaster® - 34mm Wide
A standard "Hot Dog" control plate drilled for Volume and Tone pots, and a standard switch. Plated to the highest standard with a conductive material to minimise the amount of ground wires you’ll need.
Prices From: £6.91 Inc VAT
Bridge Cover - For Vintage Telecaster®
Designed for a Vintage Telecaster® Bridge and a great part to put that finishing touch on your Tele®. First introduced in the early 50's , where most ended up as portable ashtrays for the gigging musician, the early models had a distinctive solder drop or solder mark on the inner face due the fact that a wire was attached during the electro-plating process. The later models have no such mark because the plating process moved onto specially designed racks.
Please note, these are not official Fender® parts.
Prices From: £17.81 Inc VAT
Pickguard - For Esquire®
Suitable for a the Fender® Esquire®
Please note, these are not official Fender® parts.
Prices From: £12.68 Inc VAT
Pickguard - For Telecaster® - "Surface Mount Mini Humbucker" Conversion
Surface Mounting Mini humbuckers - its a mouthful of a name, we know -
but in the sake of fairness to all the companies building them of late,
we think its only fair to give them their proper name, rather then just
saying "TV Jones®" - so, in short, you're looking a pickguard,
for your Telecaster® that will take these very specific size and shape
pickups, Be they TV Jones, or anyone elses.
Please note, these are not official Fender® parts.
Prices From: £12.68 Inc VAT
Pickguard Sheet
A basic, 3 ply blank pickguard sheet, available in a section of colours.
Prices From: £12.00 Inc VAT
20 x Pickguard Screws
These are our basic “accessory mounting screws” that we use on everything from scratch plates right through to jack sockets. For simplicities sake, we just call them pickguard screws, but they really do a multitude of jobs on a guitar.
Prices From: £2.80 Inc VAT
Loaded Pickguard - For Telecaster® Thinline
We are pleased to offer this pre-assembled wiring loom, fitted directly to a plate, suitable for an Fender® Telecaster® Thinline.
Built
in-house using high quality parts, the classic white pickguard comes
fitted two 250k short shaft pots, one orange drop capacitor and one
three way switch, and is finished with two flat top knobs and a black
top hat switch tip.
Prices From: £67.18 Inc VAT
Loaded Pickguard - For Telecaster® Deluxe® (2004 - Present)
We are pleased to offer this assembled wiring loom, fitted directly to a plate, suitable for an Fender® Deluxe® .
Built in-house using high quality parts, the classic black pickguard
comes fitted four 500k short, solid shaft CTS pots, two 0.022 orange
drop capacitor, A switchcraft toggle switch* and mono socket, and its
all wired up wiring metal braided, wax cloth hookup wire.
Prices From: £117.77 Inc VAT
Loaded Pickguard - For Telecaster® Custom®
We are pleased to offer this assembled wiring loom, fitted directly to a plate, suitable for an Fender® Custom® .
Built in-house using high quality parts, the classic black pickguard
comes fitted four 500k short, split shaft CTS pots, two 0.022 orange
drop capacitor, A switchcraft toggle switch* and mono socket, and its
all wired up wiring metal braided, wax cloth hookup wire.
Prices From: £117.77 Inc VAT