Home > Pickup Parts > Single Coils
Pick a Type:
7 & 8 String For Jaguar® For Jazzmaster®
For Mustang® For Telecaster® Noise Cancelling
Traditional/For Strat® For Burns® Single Coil Sized Humbuckers
Sort By:
Page of 3
"Rail Humbucker" Bridge Parts kit - Suitable for Telecaster "Rail Humbucker" Bridge Parts kit - Suitable for Telecaster®

This is a full kit to make one Rail Humbucker pickup, suitable for the bridge position on a Telecaster®, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £30.00 Inc VAT
"Rail Humbucker" Parts kit - Suitable for Single Coil Routes "Rail Humbucker" Parts kit - Suitable for Single Coil Routes

This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £26.40 Inc VAT
Noise Cancelling Single Coil Pickup Parts Kit 1 x Noise Cancelling Single Coil Kit

This kit contains all the parts required to make a “stacked and shielded” noise cancelling single coil.

Prices From: £24.47 Inc VAT
Single Coil Pickup Parts Kit 1 x Single Coil Pickup Parts Kit - 7 String

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

Prices From: £19.39 Inc VAT
Single Coil Pickup Alnico 5 Staggered Pole Pieces Pickup parts kit - for Fender® Jaguar®

This is a full kit to make a pickup for a Fender® Jaguar® or similar guitar.

Prices From: £18.80 Inc VAT
An Axesrus Vintage Neck Pickup Cover "Tall & Open" Lipstick Pickup Cover For Fender® Telecaster®

With tall covers and tall poles, comes increased space internally for copper - allowing you to wind a pickup to a respectable level with 42 AWG, or to use 1/4" poles with 43 AWG, or, just to go completely off the rails and design something completely unique!

Please note, these are not official Fender® parts.

Prices From: £15.47 Inc VAT
An Axesrus Vintage Neck Pickup Cover "Tall & Vintage" Lipstick Pickup Cover For Fender® Telecaster®

Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars

Please note, these are not official Fender® parts.

Prices From: £15.47 Inc VAT
Bridge Pickup Parts kit - Suitable for Telecaster® Bridge Pickup Parts kit - Suitable for Telecaster®

This is a full kit contains everything you'll need to make a bridge pickup, which would be suitable for a Telecaster®

Please note, these are not official Fender® parts.

Prices From: £15.44 Inc VAT
Vintage Single Coil Pickup Covers Single Coil Pickup Covers - Vintage/Nylon

These pickup covers are faithful reproductions of the original Single Coil covers used in the early Stratocaster® - made from Nylon rather then the PVC found on later models, and with a much softer bevel on the outside edge giving them a slightly more rounded appearance.

Prices From: £14.00 Inc VAT
Pickup parts kit - for Fender Jazzmaster Pickup parts kit - for Fender® Jazzmaster®

This is a full kit to make a pickup for a Fender® Jazzmaster® or similar guitar.

Prices From: £13.58 Inc VAT
100 x Brass Eyelets 100 x Brass Eyelets - Nickel Plated

Nickel plated brass Eyelets, for fitting into pickup fiber board, giving you a point to thread the coil wire through, and to solder the hookup wires to.

Prices From: £13.50 Inc VAT
Neck Pickup Parts kit - Suitable for Telecaster Neck Pickup Parts Kit - 1/4" Pole - For Telecaster®

This is a full kit contains everything you'll need to make a bridge pickup, which would be suitable for a Telecaster® (or similar) built around 1/4" Alnico poles.

Please note, these are not official Fender® parts.

Prices From: £13.20 Inc VAT
Pickup Parts kit - For Telecaster® Neck Neck Pickup Parts kit - For Telecaster®

A pickup parts kit, fully customisable, with a selection of different magnet grades and lengths, and available with or without covers, again, in a range of finishes and materials - all ready to wind up, and drop into your favourite Telecaster, to make it truely your own.

Please note, these are not official Fender® parts.

Prices From: £11.00 Inc VAT
Side Loading Single Coil Pickup Parts Kit 1 x Side Loading Single Coil Pickup Parts Kit - 52mm Spacing

This is a full kit to make one side loading single coil pickup, containing everything you'll need except the copper winding wire.

Prices From: £10.20 Inc VAT
Single Coil Pickup Parts Kit 1 x Single Coil Pickup Parts Kit - 50mm Spacing

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

Prices From: £10.20 Inc VAT
Single Coil Pickup Parts Kit 1 x Single Coil Pickup Parts Kit - 52mm Spacing

This is a full kit to make one single coil pickup, containing everything you'll need except the copper winding wire.

Prices From: £10.20 Inc VAT
Pickup Parts Kit - Suitable for Fender Mustang Pickup Parts Kit - Suitable for Fender® Mustang®

This is a full kit for making the pickups for a Fender Mustang or similar guitar, notablly with those slightly shorter magnets, and the close faced covers.

Prices From: £9.96 Inc VAT
Covers suitable for Burns Trisonics Bass Covers - Suitable For Burns® Trisonic® Bass

Covers suitable for Burns Trisonics Bass pickups

Prices From: £8.47 Inc VAT
Covers suitable for Burns Trisonics Covers - Suitable For Burns® Trisonic®

Covers suitable for Burns Trisonics.

Prices From: £8.47 Inc VAT
Pickup Covers for DiMarzio pickups for Telecaster Necks Lipstick Pickup Cover - for DiMarzio® Pickups for Telecaster® Necks

These are the style of covers that DiMarzio® fit to their pickups designed to go into Telecaster® neck slots - slightly different to a "normal" covers because they incorporate that "triangular" shape, and flat top from a vintage cover (although the "shape" is much less angular) but the cover is more "complete", like a modern version (where the coils are completely surrounded by the cover)

Please note, these are not official DiMarzio® parts.

Prices From: £8.32 Inc VAT
Black 7 string single coil fibre boards Single Coil Pickup Flatwork - 7 String

7 String single coil fibre boards - 61.2mm spacing, and designed for 5mm poles.

Prices From: £8.10 Inc VAT
1 x Hot Rail Bar Magnet 1 x Single Coil sized Humbucker Bar Magnet

Replacement bar magnets for single coil sized/Hot Rail pickups such as the Axesrus® TT series, DiMarzio® Fastrack line and similar pickups.

Prices From: £8.00 Inc VAT
1 x Pickup Cover - Fender® Jazzmaster® Pickup - Humbucker Conversion 1 x Pickup 'Cover' - for Fender® Jazzmaster® - Humbucker Conversion - Black

This is a "conversion" part - pretty straight forward really - its a humbucker ring internally, but the external "shape" is that of a Jazzmaster® pickup route.

Ideal if you've always wanted to drop a humbucker into your Jazzmaster® but dont fancy the hassle of replacing the pickguard.

Worth noting, that this will only work with uncovered humbuckers.

Please note these are not official Fender® parts, and the pickup and screws are not included in the price.

Prices From: £7.54 Inc VAT
Ground Plate - For Fender® Jaguar® Pickups Ground Plate - For Fender® Jaguar® Pickups

Pickups fitted to the Fender® Jaguar®, superficially at least, look very similar to normal single coils, but one of the important components that really shape their sound, is the steel grounding plate fitted underneath the bobbin.

Please note, these are not official Fender® parts.

Prices From: £6.55 Inc VAT
Anico Rod magnets for single coil pickps Alnico Magnet Set - Light Bevel (0.2mm)

Sets of Alnico rod pole pole magnets.
Available for a range of different guitars and bases, in different grades of Alnico, different combinations of length, and different diameters.

Prices From: £6.06 Inc VAT
Single Coil Pickup Alnico 5 Staggered Pole Pieces - Heavy Bevel 6 x Rod Magnets - Staggered, Heavy Bevel

These Alnico 5 pole pieces are exactly the same as we use on our single coil pickups, but we're providing them un-magnetised to allow for full customisation.

Prices From: £6.01 Inc VAT
1 x DiMarzio HS Cover - White 1 x DiMarzio HS Cover - White

Covers for DiMarzio HS, Virtual Vintage, Injector and Area Noiseless Single Coil pickups.

Prices From: £6.00 Inc VAT
1 x DiMarzio HS Cover - Mint 1 x DiMarzio HS Cover - Mint

Covers for DiMarzio HS, Virtual Vintage, Injector and Area Noiseless Single Coil pickups.

Prices From: £6.00 Inc VAT
1 x DiMarzio HS Cover - Pink 1 x DiMarzio HS Cover - Pink

Covers for DiMarzio HS, Virtual Vintage, Injector and Area Noiseless Single Coil pickups.

Prices From: £6.00 Inc VAT
1 x DiMarzio HS Cover - Red 1 x DiMarzio HS Cover - Red

Covers for DiMarzio HS, Virtual Vintage, Injector and Area Noiseless Single Coil pickups.

Prices From: £6.00 Inc VAT