This is a “parts kit” for a “Fan fret” 8 string Humbucker, and contains everything you’d need to make your own pickup, EXCEPT the wire for the coils, the hook-up wire, any tape used to protect the coils after winding, and solder.
This is a “parts kit” for a “Fan fret” 7 string Humbucker, and contains everything you’d need to make your own pickup, EXCEPT the wire for the coils, the hook-up wire, any tape used to protect the coils after winding, and solder.
These are, officially, a "Extended Range, Fan Fret, Slanted Humbucker Base" - which, as well as being a bit of a mouthful, because they turn up on fan frets that aren't extended range, and, presumably, turn up on extended range guitars that aren't fan fret!... but you get the idea.Essentially, these things turn "normal" humbuckers into slated humbuckers, which turn up on those wonderfully wacky guitars, purely to keep the pickup "where it should be" in relation to the string/its vibration.
Magnetic spacers are a novel little idea, and turn up sporadically on production pickups every so often. Essentially, they replace the inert maple or plastic spacers either side of a Humbuckers poles to alter the tone, usually by making a pickup more aggressive.
Oversized bar magnets usually turn up in higher output 7 string pickups, and are a fantastic way to get a really unique tone.
8 String Humbucker bar magnets, much longer then a standard magnet to cover the wider pole spacing.
Oversized bar magnets usually turn up in 7 String humbucker, and are a fantastic way to get a really unique tone.
Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.
Steel bar for mounting humbucker pole screws efficiently against the magnet.Available in 71.6mm
Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.
Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.
Slightly different to the "normal" poles, because these are actually 14.5mm long rather then the usual 12mm, which makes them ideal for the taller bobbins that are coming to the market nowadays, as well as anything built around a 5mm tall bar magnet and Humbucker sized P90s
Steel pole pieces for Humbuckers
These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.
Maple Humbucker Spacers
Plastic Spacers for Humbuckers
Steel bar for mounting humbucker pole screws efficiently against the magnet.Available in 57.6mm and 61.2mm
These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!
Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.
