Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.

These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!

Brass Standoffs, used to assemble fibre boards where the final pole piece, will be a 5/40 UNC threaded bolt - ideal of P90s.

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 57.6mm and 61.2mm

Maple Humbucker Spacers

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

Silicone tuning used on single coils, traditionally used in place of the springs (which have become much more common nowadays) - but the old silicone tubing has a bit of vintage charm about it.

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Steel pole pieces for Humbuckers

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Slightly different to the "normal" poles, because these are actually 14.5mm long rather then the usual 12mm, which makes them ideal for the taller bobbins that are coming to the market nowadays, as well as anything built around a 5mm tall bar magnet and Humbucker sized P90s

Plastic Spacers for Humbuckers

Plastic Spacers for Humbuckers

8 String Humbucker Base Plate.
Available in 71.6mm.

These pickup covers are designed for 7 String Pickups and are available in a range of colours with 61.2mm spacing.

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 71.6mm

Pickup Cover Suitable for a 4 string bass or 6 string guitar.

Please note, these are not official Fender® parts.

Pickup Cover Suitable for a 5 string bass or 7 string guitar.

Please note, these are not official Fender® parts.

Pickup Cover Suitable for a 6 string bass or 8 string guitar.

Please note, these are not official Fender® parts.

These Flat Plastic Humbucker Rings are suitable for 7 String Humbuckers, with an option of Chrome, Gold, Nickel or Black screws.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Oversized bar magnets usually turn up in higher output 7 string pickups, and are a fantastic way to get a really unique tone.

Oversized bar magnets usually turn up in 7 String humbucker, and are a fantastic way to get a really unique tone.

8 String Humbucker bar magnets, much longer then a standard magnet to cover the wider pole spacing.

7 String single coil fibre boards - 61.2mm spacing, and designed for 5mm poles.