Home > Pickup Parts > Mini Humbucker Parts
Pick a Type:
Floating For Hofner® "P90s"
For Firebird® Single Coil Sized Traditional
All Parts
Sort By:
Page of 2
Surface Mounting Mini Humbucker Parts Kit Mini Humbucker Parts Kit (Style 2)

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Prices From: £33.12 Inc VAT
"Rail Humbucker" Bridge Parts kit - Suitable for Telecaster "Rail Humbucker" Bridge Parts kit - Suitable for Telecaster®

This is a full kit to make one Rail Humbucker pickup, suitable for the bridge position on a Telecaster®, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £30.00 Inc VAT
"Rail Humbucker" Parts kit - Suitable for Single Coil Routes "Rail Humbucker" Parts kit - Suitable for Single Coil Routes

This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £26.40 Inc VAT
Pickup kit For Gibson Firebird Mini Humbucker Parts kit - For Firebird®

The old firebird pickup is very different to most "normal" humbuckers, and actually uses a pair of bar magnets in place of any steel poles, so we carry a kit to rebuild or repair that style of pickup.

Prices From: £25.85 Inc VAT
A traditional mini humbucker parts kit Mini Humbucker Parts Kit (Style 1)

This is a kit that includes everything you'll need to wind a traditional style mini Humbucker (except the coil and hookup wire)

Prices From: £21.77 Inc VAT
Covers for Neck mounting floating mini humbuckers in a range of colours. 1 x Pickup Cover - For Neck Mounting Floating Mini Humbucker

These covers are specifically for Neck Mounting Floating Mini Humbuckers with 50mm spacing.

All German silver construction, with beautiful Chrome, Gold, Black, or Nickel plating.

Prices From: £12.14 Inc VAT
Covers for side mounting floating mini humbuckers in a range of colours. 1 x Pickup Cover - For Side Mounting Floating Mini Humbucker

These covers are specifically for Side Mounting Floating Mini Humbuckers with 50mm spacing.

All German silver construction, with beautiful Chrome, Gold, Black, or Nickel plating.

Prices From: £12.14 Inc VAT
Pickup covers for English mounting mini humbuckers in the Filtertron style 1 x Pickup Cover - For English Mount® Black Top Filteron® Pickups

Pickup covers for English mounting® mini humbuckers in the 'Black Top' Filtertron® style

Please note - these are not official TV Jones® parts and Axesrus® makes no claims to their trademarks

Prices From: £9.14 Inc VAT
Covers for surface mounting mini humbuckers, in the 'Black Top' Filtertron style 1 x Pickup Cover - For Surface Mount Black Top Filtertron® Pickups

Covers for surface mounting mini humbuckers, in the 'Black Top' Filtertron® style as found on many Gretsch® guitars, and made popular by TV Jones®.

All German silver construction, with beautiful Chrome, Gold, Black, or Nickel plating.

Please note - these are not official TV Jones® parts and Axesrus® makes no claims to their trademarks

Prices From: £9.14 Inc VAT
Pickup covers for English mounting mini humbuckers in the Filtertron style 1 x Pickup Cover - For English Mount® Filtertron® Pickups

Pickup covers for English mounting mini humbuckers in the Filtertron style

Prices From: £9.14 Inc VAT
Covers for surface mounting mini humbuckers, in the Filtertron style 1 x Pickup Cover - For Surface Mount Filtertron® Pickups

Covers for surface mounting mini humbuckers, in the Filtertron® style as found on many Gretsch® guitars, and made popular by TV Jones®.

All German silver construction, with beautiful Chrome, Gold, Black, or Nickel plating.

Please note - these are not official TV Jones® parts and Axesrus® makes no claims to their trademarks

Prices From: £9.14 Inc VAT
Mini Humbucker sized P90 Covers in Black, Chrome, Gold, nickel and Raw Mini Humbucker Cover - German Silver - P90

A miniturised version of a P90 cover, suitable for building or repairing Mini humbucker sized P90s.

Prices From: £8.28 Inc VAT
1 x Hot Rail Bar Magnet 1 x Single Coil sized Humbucker Bar Magnet

Replacement bar magnets for single coil sized/Hot Rail pickups such as the Axesrus TT series, DiMarzios Fastrack line and similar pickups.

Prices From: £8.00 Inc VAT
Mini Humbucker Cover - Open Face Mini Humbucker Cover - German Silver - Open Faced

Open Faced Mini Humbucker cover, made from German silver, and beautifully finished in a range of colours - ideal for making foil top mini humbucker pickups!

Prices From: £7.78 Inc VAT
Mini Humbucker Cover - German Silver - Staple Mini Humbucker Cover - German Silver - Staple

Staple pickups originally turned up in various guises on Hofner® guitars - and theres quite alot of mystery surrounding them to boot.

The most common misconception is that all staple pickups are actually humbuckers (or Mini humbuckers!) - and this isn't always true. Most "Staples" (with the exposed staple poles) are actually single coils, with the staple being used to extend the magnet field.

Prices From: £7.78 Inc VAT
Mini Humbucker Cover - German Silver - Closed Mini Humbucker Cover - German Silver - Closed

Closed faced Mini humbuckers are associated with one guitar usually - the Gibson® Firebird! They actually turn up on a few other makes and models, but its the Firebird® we all think of when we see this style of cover/pickup.

The pickups in that guitar, originally, were actually a bit of a departure from what had been before - rather then using a bar magnet and steel poles (either poke screws and slug, ala a "normal HB", Pole Screws and steel bars, ala a "traditional mini HB" or even the modern Firebird offerings, which simply use 2 steel bars!) the real deal Firebird® Mini humbucker used 2 bar magnets, slotted into the housings on the bobbins.

Prices From: £7.78 Inc VAT
Mini Humbucker Cover - German Silver Mini Humbucker Cover - German Silver - Traditional

Mini Humbuckers are a bit of a strange concept truth be told - most people think they pre-date "normal" humbuckers, but this isn't actually true - they came to prominence when Gibson® aquired Epiphone® in the late 1950s, and with it, the designs for the Mini humbucker that had been popular in guitars such as the Epiphone® Emperor.

These covers are in that style - 6 holes for the pole screws to peek through, nicely finished over a base of German Silver.

Prices From: £7.78 Inc VAT
Selection of Axesrus PVC rings for Mini humbuckers 1 x Mini Humbucker Ring - PVC

These Mini Humbucker Rings are made from gloss PVC plastic in a choice of Black or Ivory, and are available in 16.5mm or 9mm high.


Prices From: £7.28 Inc VAT
Mini P90 Mounting Base Plate 1 x Mini Humbucker Mounting Base Plate - "P90"

A Mini Humbucker sized P90 base - bit of an odd ball pickup part, but a great if you're making pickups, and you're hamstrung by guitar routes!

Prices From: £6.00 Inc VAT
Black, Chrome and Gold Hot Rail pickup Poles 2 x Single Coil Sized Humbucker Rail Poles (Flat)

Replacement Rails for Pickups such as the Axesrus TT series, but now slightly wider and completely flat across the top - ideal for wider string spacings, or flatter radius necks.

Prices From: £5.38 Inc VAT
Black, Chrome and Gold Hot Rail pickup Poles 2 x Single Coil Sized Humbucker Rail Poles (Curved)

Replacement Rails for Pickups such as the Axesrus TT series, and DiMarzios Fast Track line

Prices From: £5.38 Inc VAT
Selection of Axesrus Metal rings for Mini humbuckers 1 x Mini Humbucker Ring - Metal (91 x 41mm)

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

Prices From: £4.18 Inc VAT
Selection of Axesrus Metal rings for Mini humbuckers 1 x Mini Humbucker Ring - Metal (90 x 39mm)

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

Prices From: £4.18 Inc VAT
Selection of Axesrus Metal rings for Mini humbuckers 1 x Mini Humbucker Ring - Metal (87 x 38.5mm)

Completely Flat Metal Mini Humbucker Ring

Please note - these rings will fit any Axesrus Mini Humbucker with or without a cover, but this may not be the case for other manufacturers - so its worth making certain your humbucker to no larger then the internal dimensions.

Prices From: £4.18 Inc VAT
Bar Magnets for Firebird 1 x Bar Magnet - 52x8.5x3.2MM

These are the bar magnets commonly found in Gibson® firebird mini humbuckers - used as a magnetic pole within the bobbin, resulting in a very different tone.

Prices From: £4.00 Inc VAT
Humbucker Bar Magnet - Alnico 5 1 x Bar Magnet - 58 x 10 x 3.2

One of the "oddity" sizes of bar magnet - sometimes turn up in P90s, sometimes turn up in Mini-buckers, very rarely, even in full sized humbuckers. As always, worth checking the sizes to make sure this is the one you need.

Prices From: £4.00 Inc VAT
A selection of Poles for Staple pickups in Black, Gold, Nickel and Chrome 1 x Staple Pick Pole

These are the staple poles that turn up on, surprisingly, staple pickups - often thought to sit within a coil, they are usually used to simply extend the magnetic field of the bar magnet.

Prices From: £3.73 Inc VAT
Pole bolts for Filtertron style pickups 6 x #6-40 UNF Pole Screws - Slot Head - Suitable for Filtertron® Pickups

Pole pieces, in the, frankly, strange thread size, seen on Filtertron pickups, make from mild steel, and electroplated to give a perfect match to the rest of your guitars hardware.

Prices From: £3.46 Inc VAT
Pickup Bobbin - Suitable for TV Jones® Pickups 1 x Pickup Bobbin - Suitable for Filtertron® Pickups

Miniature screw pole bobbins, as used on various mini Humbuckers, but probably best known for appearing on TV Jones® Pickups such as the Filtertron®

Please note - these are not official TV Jones® Parts

Prices From: £3.12 Inc VAT
Humbucker Pole Screws - Hex Head Pole Screws - Hex Head

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Prices From: £3.07 Inc VAT