This is a full kit to make a pickup for a Fender® Jazzmaster® or similar guitar.

Nickel plated brass Eyelets, for fitting into pickup fiber board, giving you a point to thread the coil wire through, and to solder the hookup wires to.

This is a "conversion" part - pretty straight forward really - its a humbucker ring internally, but the external "shape" is that of a Jazzmaster® pickup route.

Please note these are not official Fender® parts.

Sets of Alnico rod pole pole magnets.
Available for a range of different guitars and bases, in different grades of Alnico, different combinations of length, and different diameters.

A slightly strange screw in the grand scheme of things - most definitely
a #4 screw based on its thread, but with a #2 sized head.

Set of 8 3/4 Thread, Phillips, Pan head Screws designed to screw into a guitar body/nut and hold a Bass pickup or P90 against its supporting springs/Foam. Available in Nickel, Black or Gold.

Fibre boards to make pickups for the Fender® Jazzmaster®

Pole spacing at 51.5mm

One meter of vintage style hookup wire - 22 AWG pre-tinned central core, surrounded by a wax coated, cloth insulation.

(2)

When we're dealing with surface mounting pickups, traditionally, there will be some relatively hard, close celled foam underneath which will give some level of height adjustment - its certainly not variable as "hanging" pickups, with the bolts and springs, but its fairly common - The Jazzmaster®, Jaguar®, Precision® and Jazz® Bass, as well as most P90s will employ sponges.