Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.

These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

These are the very small screws which you'll see mounting truss rod covers in place on the headstock

6-32 UNC bolts usually turn up on American/Mexican/UK made instruments and parts - primarily pickups and switches, but they are becoming more common on Eastern made things too nowadays - its a little bit confusing, because theres a few different "types" (and you do get guitars that have a mix of different heads/lengths) - so as a quick, rough and ready guide.

Good quality Springs to hold Pickups against pick guards or mounting rings reliably, with a little bit of play.

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

Good quality Springs to hold Pickups against pick guards reliablly, with a little bit of play.

Quite a specific screw to be honest - i cant think I've seen them being
used for anything else apart from mounting Filtertron pickups.

Silicone tuning used on single coils, traditionally used in place of the springs (which have become much more common nowadays) - but the old silicone tubing has a bit of vintage charm about it.

A full thread, phillips head, recessed screw that you'll find carrying out various jobs on a guitar.

Suitable for Humbucker mounting rings, Gibson style pickguards and back plates, Jack plates etc

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full Thread, Phillips, Dome head Screws used to mount a humbucker through the pickguard or mounting ring. Supplied with Springs (4)

(1)

This is a set of switch mounting and pickup height adjustment bolts for the Fender® Statocaster® and similar guitars.

Specifically, these are 6-32 UNC (imperial thread) bolts, with dome, phillips heads, with 6 "small" head screws for the pickups, and 2 larger headed versions for the switch, as well as 6 height adjustment springs.

This is a set of switch mounting and pickup height adjustment bolts for the Fender® Statocaster® and similar guitars.

Specifically, these are 6-32 UNC (imperial thread) bolts, with dome, phillips heads, with 6 "small" head screws for the pickups, and 2 larger headed versions for the switch, as well as 6 height adjustment springs.

(1)

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

These are the very small screws which you'll see on certain pickup surrounds, back plates etc - very similar to a pickguard screw really, and for some applications, they're used for that purpose.

Full Thread, Phillips, Dome head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Chrome, Black,Nickel, Cosmo or Gold, in both 24mm and 30mm thread lengths

(2)

Full Thread, slot head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Nickel, 33mm thread lengths

Quite a specific screw to be honest - i cant think I've seen them being
used for anything else apart from mounting Filtertron pickups.