Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.

These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!

These are the very small screws which you'll see mounting truss rod covers in place on the headstock

#3 Round head Screw

Thin Rail Humbucker pole,

Good quality Springs to hold Pickups against pick guards or mounting rings reliably, with a little bit of play.

These are the small bras screws traditionally used to mount a humbuckers bobbins to their base plates.

A slot headed, threaded cast FeCrCo magnet - a great was to build up Wide range humbuckers with truly magnetic poles pieces.

Threaded to the standard USA thread used on the originals, and whilst therese aren't CuNiFe, they're about as close as your going to get in the modern day. A great part for historically correct builds.

This is a small plate, which you can mount onto a "normal" humbucker
base, to make it compatible with a Fender® "3 hole" routed pickguard or
pickup ring.

Alnico 5 poles for our Staple pole P90s boards, covers and bases

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Steel pole pieces for Humbuckers

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Slightly different to the "normal" poles, because these are actually 14.5mm long rather then the usual 12mm, which makes them ideal for the taller bobbins that are coming to the market nowadays, as well as anything built around a 5mm tall bar magnet and Humbucker sized P90s

Full threaded, Hex head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full threaded, slot head fillister pole bolts for humbuckers, available in Chrome, Gold, Black, Nickel and Cosmo, in M3 and 5 40 UNC threads.

Full Thread, Phillips, Dome head Screws used to mount a humbucker through the pickguard or mounting ring. Supplied with Springs (4)

(1)

We’ve called these screws “All Purpose” for so long now,
that I’ve actually struggled to get my head around the idea of calling them by
their “real” name - #3 x ¾”, Oval head screws!

"In House", we call these screws PSH's, but to give them their real name, they're #3 Countersunk screws! They're, in very simple terms, the "truly countersunk" version of our All Purpose screws, giving a slightly cleaner finish, (assuming) your recess is for a #3 screw head.

A twist on a common these with these "small guitar screws" - #2 countersunk screws!

If I was to be VERY strict about this, I've only ever seen these turn up on guitars in places i would expect to see #3 screws - almost entirely cross compatible (thread diameter is 2.2mm rather then 2.4mm) but, importantly, the heads are slightly smaller on the #2s vs. the #3s. (2.4mm vs 2.8mm)

Full Thread, Phillips, Round head bolts used to mount a humbucker through the pickguard or mounting ring.

(2)

Slot Headed bolts with M5 thread for Wide Range humbuckers.

Replacement Rails for Pickups such as the Axesrus TT series, and DiMarzios Fast Track line

Replacement Rails for Pickups such as the Axesrus TT series, but now slightly wider and completely flat across the top - ideal for wider string spacings, or flatter radius necks.

Full Thread, slot head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Nickel, Gold and Black, 33mm thread lengths

Fat Rail Humbucker pole, supplied with M2 Mounting Bolts