Home > Hardware > Control Plates
Sort By:
Page of 1
Control Loom for Telecaster with Toggle Switch Control Assembly - For Tele® - Toggle Switch

A Prewired control assembly for the Fender Telecaster, but with a toggle switch in place of the traditional lever switch
Please note, these are not official Fender® parts.

Prices From: £77.16 Inc VAT
Control Assembly - Suitable for Fender® Jaguar® Guitar - Rhythm Circuit Control Assembly - Suitable for Fender® Jaguar® Guitar - Rhythm Selector

Rhythm circuit control assembly for the Fender® Jaguar guitar

All loaded onto a control plate, in the colour of your choice, ready to connect your pickups to/the rest of the loom, and drop into the guitar.

Please note, these are not official Fender® parts.

Prices From: £71.00 Inc VAT
Control Loom for Telecaster with Slanted Switch Control Assembly - For Tele® - Slanted Switch

A Prewired control assembly for the Fender Telecaster, but with a slanted switch control plate, giving better access to the switch and volume control.
Please note, these are not official Fender® parts.

Prices From: £61.56 Inc VAT
Control loom- For Telecaster - 4 way mod Control Assembly - For Tele® - 4 way Mod

A completely constructed Control plate, for a Fender® Telecaster®, wired to the the 4 way mod version - Standard switching plus an extra option for both pickups in series, 1 volume, 1 tone, bridge, both and neck - a Tele® with a little bit more on offer.

Built using the highest spec parts - CTS pots, Oak Grigsby Switch, Cornell dubillier cap, 22 AWG vintage cloth hookup wire and a switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barell knobs fitted.

Please note, these are not official Fender® parts.

Prices From: £60.84 Inc VAT
Control loom- For Nashville Telecaster Control Assembly - For Nashville Tele®

A completely constructed Control plate, for a Fender® Nashville Telecaster®, differing from a Normal Tele® in that is has 3 pickups, rather then 2, so this is reflected in the switch so you're getting the following setup- 5 way switching, 1 volume, 1 tone, bridge, both and neck.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Prices From: £57.96 Inc VAT
Control loom- For Telecaster Control Assembly - For Tele®

A completely constructed Control plate, for a Fender® Telecaster®, wired to the modern standard - 3 way switching, 1 volume, 1 tone, bridge, both and neck - as we all know and love.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Prices From: £57.96 Inc VAT
TOP SPEC Bass Control Assembly Control Assembly - For Fender® Jazz® Bass

Suitable for a Jazz® Bass

Please note, these are not official Fender® parts.

Prices From: £56.00 Inc VAT
Control loom- For Volume only Esquire "Volume only" Control Assembly - For Esquire®

A bit of a strange plate all things considered - designed to fit onto a Fender® Esquire® (or any other Telecaster® with only one pickup) - but cutting away all the bells and whistles - no 3 way switch, no tone control - just a volume control, and a mono socket on the output.

A great way to turn your Esquire into a no-nonsense player!

Prices From: £54.00 Inc VAT

(1)
Control Assembly - Suitable for Fender® Jaguar® Guitar Control Assembly - Suitable for Fender® Jaguar® Guitar - Master Controls

A control assembly for the Fender® Jaguar guitar - loaded up with CTS pots, and a switchcraft mono socket.

Please note, these are not official Fender® parts.

Prices From: £54.00 Inc VAT
Control loom- For Humbucker Neck Telecaster Control Assembly - For "Humbucker Neck" Tele®

A completely constructed Control plate, for a Fender® Telecaster®, wired to the modern standard - 3 way switching, 1 volume, 1 tone, bridge, both and neck - as we all know and love.

Built using the highest spec parts - CTS pots, Axesrus Switch, Cornell Dubillier cap, 22 AWG vintage cloth hookup wire and a Switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barrell knobs fitted.

Please note, these are not official Fender® parts.

Prices From: £50.04 Inc VAT
Control Assembly - Suitable for Fender Mustang Guitar Control Assembly - Suitable for Fender® Mustang® Guitar

A control assembly for the Fender® Mustang guitar - loaded up with CTS pots, and a switchcraft mono socket.

Please note, these are not official Fender® parts.

Prices From: £46.00 Inc VAT
Control Assembly - Suitable for Fender® Jaguar® Guitar - Pickup Selector Circuit Control Assembly - Suitable for Fender® Jaguar® Guitar - Pickup Selector/Bass Cut

Pickup Selector and bass cut control assembly for the Fender® Jaguar guitar

All loaded onto a control plate, in the colour of your choice, ready to connect your pickups to/the rest of the loom, and drop into the guitar.

Please note, these are not official Fender® parts.

Prices From: £42.80 Inc VAT
A Switching Assembly Suitable for Fender® Mustang® Guitar Switching Assembly - Suitable for Fender® Mustang® Guitar

This switching assembly for the Fender® Mustang® guitar.

Feature two three way sliding switches, with a choice of black or white tip.

Prices From: £39.20 Inc VAT
Control Plate for Fender Jaguar in Chrome Toggle Switch Control Plate - For USA Jaguar®

This is a conversion plate for the Fender® Jaguar® (specifically the USA model) routed for use with a toggle switch, as a way of simplifying the switching.

Please be aware these are not official Fender® parts.

Prices From: £21.60 Inc VAT
5 in stock!
Bass Control Plate - 3 Hole Bass Control Plate - 3 Hole

The “3 hole” version of the bass control plate appeared at the very birth of the instrument in 1960, and ran through all of 61 and into the early part of 1962. Conversely, most of the ’62 re-issues sport this style of plate, whilst the majority of the originals seem to come with the “4 hole” version.

Prices From: £14.84 Inc VAT
23 in stock!
Bass Control Plate - 4 Hole Bass Control Plate - 4 Hole

Following on from the "3 Hole" version, the "4 hole" version became the standard part used on basses from 1962 until the modern era.

Prices From: £14.00 Inc VAT
A Control Plate with Toggle Switch Hole for Fender® Telecaster® Control Plate With Toggle Switch Hole - Suitable For Telecaster® - 32mm Wide

A 32mm wide control plate for the Telecaster®, with a hole for a toggle switch. Fantastically well finished, with a high level of electroplating. Supplied with cross head, recessed mounting screws. Please note these are not official Fender® parts.

Prices From: £11.16 Inc VAT
A Selection of Control Plates with Slanted Switch Slot for Fender® Telecaster® Control Plate With Slanted Switch Slot - Suitable For Telecaster® - 32mm Wide

A 32mm wide control plate for the Telecaster® with a slanted switch slot. Fantastically well finished, with a high level of electroplating. Supplied with cross head, recessed mounting screws. Please note these are not official Fender® parts.

Prices From: £11.16 Inc VAT
A Selection of Axesrus Blank Steel Control Plates for Fender® Telecaster® Blank Control Plate - Suitable For Telecaster® - 32mm Wide

A blank control plate for the Telecaster®, fantastically well finished, with a high level of electroplating.




Prices From: £11.16 Inc VAT
Switch Control Plate for Fender Jaguar in Chrome Switch Control Plate - For USA Jaguar®

This is the switch control plate for the Fender® Jaguar®.

Prices From: £8.82 Inc VAT
19 in stock!
Control Plate for Fender Jaguar in Chrome Control Plate - For USA Jaguar®

This is one of the control plates you will need for the Fender® Jaguar®. Fulfilling a purely functional role in the grand scheme of things, it is simply there to provide mounting for the volume and tone controls as well as the jack socket.

Prices From: £8.82 Inc VAT
93 in stock!
Selection of Axesrus Steel Control Plates for Fender® Telecaster® Control Plate - Suitable For Telecaster® - 32.2mm Wide

A standard control plate for the Telecaster®, in the size most commonly used by Fender® Japan - slightly wider then the USA version, and drilled out to accept metric sized pots.

Prices From: £6.91 Inc VAT

(1)
Control Plate - Suitable for Fender® Musang® Guitar Control Plate - for Mustang® Guitar

This is a Steel control plate, immaculately plated, to fit a Fender® Mustang® Guitar

Prices From: £6.91 Inc VAT
Control Plate - Suitable for Fender® Musang® Bass Control Plate - For Japanese Mustang® Bass

This is a Steel control plate, immaculately plated, to fit a Fender® Mustang® Bass

Prices From: £6.91 Inc VAT
Selection of Axesrus Steel Control Plates for Fender® Telecaster® Control Plate - Suitable For Telecaster® - 32mm Wide

A standard control plate for the Telecaster®, with a standard switch slot, and two pot holes large enough to take CTS pots. Fantastically well finished, with a high level of electroplating.

Prices From: £6.91 Inc VAT

(1)
Hot Dog Control Plate - 33.5mm Wide Control Plate - Suitable For Telecaster® - 34mm Wide

A standard "Hot Dog" control plate drilled for Volume and Tone pots, and a standard switch. Plated to the highest standard with a conductive material to minimise the amount of ground wires you’ll need.


Prices From: £6.91 Inc VAT
Switch Control Plate for Fender Jaguar in Chrome Hexagonal Control Plate - For Jaguar®

This is the switch control plate for the Fender® Jaguar®.

Prices From: £4.27 Inc VAT
16 in stock!
Axesrus - Pot Bracket - For Fender Jaguar 1 x Pot Bracket - For Fender® Jaguar®

The Pot bracket used to mount the side loading pots on the Fender® Jaguar®

Prices From: £3.78 Inc VAT
151 in stock!
1 x Set of Grub Screw Concentric knobs Small Bore Concentric knobs- Small Bore

Available in Gold, Black and Chrome Bottom Knob - 6mm Shaft Hole, Top Knob - 3mm Shaft Hole.


Prices From: £3.50 Inc VAT