Axesrus - Control Plate

Home > Pickguards, Knobs & Covers > Knobs, Covers & Tips >

Control Plate - Suitable For Telecaster® - 32mm Wide

Selection of Axesrus Steel Control Plates for FenderÂ® TelecasterÂ®

Alternative Views:

Prices From: £6.91 Inc VAT

Thickness:
Colour*:

Qty:

Description

Technical Specs

Main Description

A standard Telecaster® control plate drilled for Volume and Tone pots, and a standard switch.

Plated to the highest standard with a conductive material to minimise the amount of ground wires you’ll need.

The Telecaster® control plate has been a source of frustration for many years when it comes to upgrades and replacement parts. The main bone of contention is the varying specs that appear not only on true telecasters, but also on imports and home builds, which then dictate the dimensions and placement of the Pickguard.

There doesn’t seem to be a hard and fast rule, but it’s simply a job of measuring to find out which spec fits you’re guitar. This version is 32mm at the widest point,

Gibson®, Epiphone®, Stratocaster® and Strat® are registered trademarks of Fender Musical Instruments Corporation and Gibson Musical Instruments Corporation. Axesrus® has no affiliation with FMIC

Colours

I appreciate that I'm at the thin end of the wedge when it comes to guitar parts, and for most, when we speak about colours, its usually "Chrome, Black or Gold" - but, as you've probably spotted, there are quite a few more options then that, so, heres some photos of the various "common" colours.

 
ChromeChrome, or, more accurately “Chromium plated” is, at least  from an electroplating point of view, the best of the best when it comes to  finish. Its hard wearing, abrasive and corrosion resistant, will take a polish,  can achieve a mirror finish and is, relatively, cheap to produce.

    Officially “replacing” Nickel plating in the 1930s, guitars were relatively  late adopters to Chrome plating (although Fender® used it in the 1950s) and it  wouldn’t become common until the 1970s, and, even then? It wasn’ exactly rare  to see Chrome and Nickel plated parts mounted side by side on the same guitar.

    Often confused with Nickel, a quick rule of thumb? Chrome is Silver with a blue  sheen. 

  Nickel

Nickel  plating was old hat by the time electric guitars we’re invented, and had, by  and large, been replaced with Chrome plating, however, most manufacturers kept  producing Nickel plated parts.

Slightly softer then Chrome, so quicker to wear, but less reactive (so less  likely to rust with sweat, although, honestly? I’d challenge that – I’ve seen  more sweat corroded Nickel then Chrome personally!) – Its considered to have a “more  pleasing” hue, silver with a hint of yellow.
 
   Gold
Gold  electroplating has had a hard time over recent years – often maligned as “not  real gold”, it actually is! However, that doesn’t change the fact that is a  soft, expensive metal electroplated onto a much harder base material.

It will, relatively quickly, wear through, and has absolutely horrendous abrasion  resistance. Furthermore, in an effort to keep costs down, the karat of gold  plated guitar parts means that it has lost some of its “unreactive” qualities.

It is also, heavily dependent on the price of gold too – as gold prices  increase, electroplating costs don’t, but the “shade” of the gold will, invariably,  change (usually lightening)

But, it is the ultimate in decorative finishes! Small parts and screws aren’t  badly affected by the problems, but with larger parts, I’d strongly suggest going  in with a “it’ll look great from the front row” mentality, because you will  drive yourself mad trying for perfection from 4 inches.

 
CosmoCosmo  is one of my favourite plating colours. It is, officially, known as “Ruthenium”,  and occasionally called “Black Nickel” –is a vaguely “dark grey metal”, which  is fairly scratch and abrasion resistant, and is relatively unreactive.

Most commonly appearing on Ibanez® guitars, with the Edge Tremolo systems and  Gotoh machine heads being available in Cosmo for as long as I can remember, its  not exactly common, but it’s a very nice colour if your looking for something  different. Almost a “gun metal grey”

Interestingly, whilst Ruthenium is hard wearing (certainly more than Nickel and  Gold), there are instances where it wears very quickly. Seemingly theres something  in our sweat that it dislikes. 

  Black

Black  plating is… funny. I’ve asked countless factories for “more information” and  every one of them has given me a different answer. Its “Black Chrome”, its “Black  zinc”, Its “zinc oxide”, its “nickel Oxide” – frankly, I don’t know any more,  so I’ll fall on the sword of ignorance.

Its Black – its soft, it scratches very easily, it wont take a polish. Its  horrible to work with, its horrible to live with day to day, and I’d strongly  advise against picking any “big parts” in black – they’ll look amazing now, but  in a year, you’ll be cursing them.

Its also grease magnet. Finger prints will haunt you.

It is, however, absolutely fine for screw, bolts and small parts. I just wouldn’t  suggest humbucker covers of tremolos.
 
  Unplated

A little unfair, because you dont really see many unplated screws, and whilst there are a few different parts that are offered unplated, its difficult to uniformily say "all unplated metals look the same".
Normally, we only ever see the following materials unplated.
Mild steel, which is a dark bluey grey colour, and is prone to corrosion and oxidisation. 
Stainless steel, which is a very flat grey. More common, because it doesn't rust, but most people want it polished to a mirror finish, which is labour intensive and increases the cost. (and acheives the same results as Nickel or Chrome plating)
German Silver, is a slightly yellowy grey, most found on metal pickupc overs.
And brass, which is a "mucky yellow" colour.

Sound Clips

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 1 Write a review »

6 of 6 people found the following review helpful:

Great quality, great price, great options	February 17, 2023
Reviewer: Notalentcaster from Scotland

I bought the 2mm thick chrome version. The plate is a 100% size match for the old Fender one I am replacing it with. The plate is well finished with no rough edges or burrs and the chrome plating is perfect. Nice to see a wide range of options available.

Was this review helpful to you?