These Hipshot® 6 String Tone-A-Matic Tailpieces are expertly crafted from aluminium and beautifully plated in a range of colours.
Supplied with Studs.

A standard 6 string tail piece,made from Aluminium - beautifully plated in either Gold, Chrome or Nickel, and supplied with (or without) either imperial or metric bushes, in a range of different sizes - plenty of variables, but ultimately, a very simple guitar part - turn up on most "non tremolo" guitars, and simply act as an anchor point for the strings before they travel over the saddles.

Please note - these are not official Gibson® parts

As found on most solid bodied guitars. Pretty much  standard across the range, as long as their hard wearing and keep your strings in place, their doing their job well.

These are aluminum, imperial tail piece posts, suitable for Gibson and guitars using similar tail pieces with 5/16 inch threads

As found on most solid bodied guitars. Pretty much standard across the range, as long as their hard wearing and keep your strings in place, their doing their job well. Now available in a 12 String Model

Supplied with Studs and Bushes

A standard 6 string tail piece, available in either modern zinc alloy (sometimes called Zamak) - beautifully plated in either Gold, Chrome or Nickel, and supplied with (or without) either imperial or metric bushes, in a range of different sizes - plenty of variables, but ultimately, a very simple guitar part - turn up on most "non tremolo" guitars, and simply act as an anchor point for the strings before they travel over the saddles.

Please note - these are not official Gibson® parts

An elegant solution for a Tail Piece on a solid, or hollow bodied guitar. Simply fit the hinge to the bottom of the guitar (where the strap pin should be) then hook in the new tail piece.

Locking tail piece posts are quite clever actually. The "top" section of the post unscrews onto the bottom, so its capable of "holding" the tail piece in situ, so it will never fall off and go missing mid string change.

Locking tail piece posts are quite clever actually. The "top"
section of the post unscrews onto the bottom, so its capable of
"holding" the tail piece in situ, so it will never fall off and go
missing mid string change.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

These are steel, M8 tail piece studs, suitable for most Epiphone models, which use tail pieces, and guitars made in to metric specifications,

These are steel, imperial tail piece posts, suitable for Gibson and guitars using similar tail pieces with 5/16 inch threads

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.

This is the threaded insert, that is pressed into the body of the guitar, and accepts an 5/16" x 24 UNC threaded post.