Home > Bridges & Tremolos > Suitable for Telecaster® > Spare Parts
Pick a Type:
Base Plates Ferrules Saddles
Screws
Untitled Document
Pick a Brand:
  • Hipshot®
  • Schaller®
  • Wilkinson®
Base PlatesGotoh Telecaster Bridge Base Plate FerrulesVintage Bridge Ferrules for Telecaster SaddlesWilkinson Adjustable Telecaster Saddles

Screws, Bolts & SpringsFull Thread Recessed Bridge Screws

Sort By:
Page of 1
3 x Gotoh SW-3 Adjustable Saddles - Suitable for Fender® Telecaster® 3 x Gotoh® SW-3 Adjustable Saddles

Gotohs SW-3 saddles are completely adjustable to allow you to set your intonation absolutely perfectly on your Telecaster® without having to forfeit those all important brass saddles!

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £41.44 Inc VAT
3 x Gotoh InTune Saddles - Titanium 3 x Gotoh® InTune Saddles - Titanium

A full set of In-tunes - ideal for upgrading your existing bridge.

Worth nothing that the middle saddle will be the reverse of the 2 outside saddles, but Gotoh have got you covered! Simply spin the saddle round, and the "reverse" stagger is on the back side of the saddle.

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £39.94 Inc VAT
Gotoh® S11 Saddles - Steel 6 x Gotoh® S21 Saddles - Steel

A full set of six 10.5mm Saddle for 2 1/8" (52.38mm/52.5mm) Spaced
bridges, made from Steel and chrome plated for a fantastic finish.

Prices From: £34.54 Inc VAT
Gotoh® S11 Saddles - Brass 6 x Gotoh® S11 Saddles

A full set of six 10.5mm Saddle for 2 1/8" bridges, made from brass and chrome plated for a fantastic finish.

Prices From: £34.54 Inc VAT

(1)
1 x Gotoh "BS-TC1" Bridge plate - Chrome 1 x Gotoh® "BS-TC1" Bridge plate - Chrome

Replacement base plate for the Gotoh BSTC vintage Bridge

Prices From: £25.00 Inc VAT
1 x Smooth & Slanted Brass Saddle - For Telecaster Cut Down Bridge Plate - Chrome

This is a bit of an obscure one to be honest – it’s a bridge built to mount to a vintage Telecaster®, or guitars built in that style, but rather than incorporating the pickup mounting on the bridge plate, this is the cut down version, so it’s much shorter, allowing you to do whatever you fancy in the space infront of it.

Suitable for a Telecaster® or Similar with 4 screw bridge & 3 Saddles

Prices From: £25.00 Inc VAT
3 x Gotoh InTune Saddles - Brass 3 x Gotoh® InTune Saddles - Brass

The brass version of the InTune system is about as close as you'll get to a traditional Tele® saddle with intonation correction - beautifully made, plenty of meat on the bones, and absolutely fantastic tone.

Worth nothing that the middle saddle will be the reverse of the 2 outside saddles, but Gotoh have got you covered! Simply spin the saddle round, and the "reverse" stagger is on the back side of the saddle.

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £18.02 Inc VAT

(1)
Fender® Telecaster® Bridge Cover Bridge Cover suitable for Vintage Telecaster® Bridge Cover

Designed for a Vintage Telecaster® Bridge and a great part to put that finishing touch on your Tele®. First introduced in the early 50's , where most ended up as portable ashtrays for the gigging musician, the early models had a distinctive solder drop or solder mark on the inner face due the fact that a wire was attached during the electro-plating process. The later models have no such mark because the plating process moved onto specially designed racks.

Please note, these are not official Fender® parts.

Prices From: £17.81 Inc VAT
1 x Gotoh SW-3 Adjustable Saddles - Suitable for Fender® Telecaster® 1 x Gotoh® SW-3 Adjustable Saddle

We're supplying these singly as well as in sets, purely because we know that they're not the cheapest parts in the world, so if you've got a WT3 kicking about thats in need of a little loving care, this is a great way to get it up and running again.

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £16.56 Inc VAT
1 x Gotoh InTune Saddles - Titanium 1 x Gotoh® InTune Saddle - Titanium

Just like with the SW-3s, we're selling these saddles singly - we know that they're not the cheapest things in the world, and if you just need to get a Gotoh bridge up and running again, this is a fantastic way to do it with the minimum of expense.

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £15.97 Inc VAT
Smooth & Slanted Brass Saddle - For Telecaster 3 x Smooth & Slanted Brass Saddle

Now these are a favourite in the office – they are, for all intents and purposes, completely smooth saddles, complete with those all-important slot head height screws, all full sized, absolutely no loss of mass, so no arguments against the tone – but the intonation screws have been drilled on a slant to match that compensation you’d get on the intonation correction saddles.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £15.00 Inc VAT
Compensated Brass Saddles - Left Handed - Suitable for Fender® Telecaster® 3 x Compensated Brass Saddles - Left Handed

A great way to get better intonation on your Vintage Telecaster® without losing too much of the look.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £12.24 Inc VAT

(1)
Compensated Brass Saddles - Suitable for Fender® Telecaster® 3 x Compensated Brass Saddles

A great way to get better intonation on your Vintage Telecaster® without losing too much of the look.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £12.24 Inc VAT
Multiple Groove Saddles - Suitable for Telecaster® 3 x Multiple Groove Saddles

Multi-Groove saddles, in the style used in the 1960s, made from brass with slot head height adjustment screws.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £10.20 Inc VAT
Smooth Brass Saddles - Suitable for Fender® Telecaster® 3 x Smooth Brass Saddles

The grand-daddy of all Saddles, and for most folks, unparalleled when it comes to tone when you’re talking Tele®! Full sized brass barrels, slot head height screws, just beautiful bits of kit.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £10.20 Inc VAT
Single Groove Saddles - Suitable for Telecaster® 3 x Single Groove Saddles

Single Groove saddles, ideal for improving string stability at the bridge. Made from brass with Hex head height adjustment screws.

Suitable for a Telecaster® or Similar with 3 Saddles

Prices From: £9.00 Inc VAT
Vintage Ferrules - Smooth Edge Ferrules - Smooth Edge

Ferrules are a fairly basic piece of hardware once you look into them; they are simply small metal “cups” which hold the ball end of the string in place as it is fed through the back of the guitar.

The advantages compared to a “string though top” setup are pretty wide ranging, but the main attraction is that they allow the strings movement to resonate more efficiently through the wood of the guitars body, giving a much more honest tone to the sound, really emphasising that classic Tele® snap and twang that has proven so popular in recent decades.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £7.90 Inc VAT
1 x Gotoh InTune Saddles - Brass 1 x Gotoh® InTune Saddle - Brass

Just like with the SW-3s, we're selling these saddles singly - we know that they're not the cheapest things in the world, and if you just need to get a Gotoh bridge up and running again, this is a fantastic way to do it with the minimum of expense.

Suitable for a Telecaster® or Similar with 3 saddles

Prices From: £7.80 Inc VAT
Grooved Barrel Saddles Grooved Barrel Saddles

A standard Telecaster® saddle, an ideal replacement for nearly all Vintage bridges in need of a little TLC. The groove offers extra stability for the string to avoid it snagging and moving on contact.

Please note, these are not official Fender® parts.

Prices From: £6.00 Inc VAT
Vintage Ferrules - Knarled Edge Ferrules - Knarled Edge

The Knarled Edge ferrules turn up fairly often on guitar made in the far east rather then in the USA (which seem to use the Smooth edged version with more regularity) - exactly the same principle but the knarlled edge have "teeth" around the barrel section to help them grip the body more efficiently.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £5.00 Inc VAT
Bullet Ferrules Ferrules - Bullet

These "bullet" ferrules are a slight departure from the original version of the 50s and 60s. They initially debuted as a companion part to a set of strings in the mid 70s and more commonly seen on hard tails.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £4.50 Inc VAT
Recessed, 3/4 Thread Bridge Screws 6 x 3/4 Thread, Counter Sunk Bridge Screws

Available in Gold, Chrome and Black, Recessed Phillips Head .

A perfect replacement for most bridge screws.

Prices From: £2.26 Inc VAT
Recessed, Full Thread Bridge Screws 6 x Full Thread, Counter Sunk Bridge Screws

Available in Gold, Chrome and Black, Recessed Phillips Head .

A bit of an odd ball part, we generally find their great for hard tail bridges, where the full thread offers a tight lock without having to compromise for the movement of a trem unit.

Prices From: £2.26 Inc VAT

(1)