A completely constructed Control plate, for a Fender® Telecaster®, wired to the modern standard - 3 way switching, 1 volume, 1 tone, bridge, both and neck - as we all know and love - just with one tiny alteration to the norm - the control plate has the switch slot slanted to give better access to both switch and volume pot.
Built using the highest spec parts - CTS pots, Oak Grigsby Switch, Cornell dubillier cap, 22 AWG vintage cloth hookup wire and a switchcraft socket, all connected together, ready to do, and mounted onto a beautifully plated control plate and barell knobs fitted.
The Standard Parts
This particular model is specifically designed to be used with single coils; simply because it’d get pretty daunting pretty quickly if we let you tweak every single part.
Pots – we always use CTS pots where we can, they’re top quality, they’ve got an exceptionally long life span, they’re what’s been used on the Telecaster® since day one, and let’s be honest, that’s the tone we’re chasing with this assembly.
Caps – You’ll see various discussions out there about which cap is the best, “which value/which voltage/what materials are going to give me the best tone?” – And there’s a whole raft of opinions as to the right answer. Rather than get drawn into it, we’ve kept it simple – you’re getting a 0.047, 100v Cornell Dubliner Orange Drop cap. Not because we don’t subscribe to the whole “great cap debate” – but it’s just the most bang for your buck you’re going to get. It matches up to the originals in terms of electrical specification.
Wire – we use vintage correct 22 AWG black and white cloth covered waxed wire. A dream to work with and has no adverse effects on your tone.
Socket – That’ll be a Switchcraft standard Mono, best in the business if you ask us, dead simple to get your head around how it works, and just like CTS – will probably outlast every other part on a guitar.
3 Way - This is what we’d call the standard setup for your average Telecaster® - it’s a full sized switch that’ll give you Bridge, Bridge and Neck in parallel and the Neck on its own – exactly how you’d expect if you’ve played any Tele® since about 1967! (Before then – wiring was a little different to say the least!)
Control plate – OK, it’s not the most interesting part you’ll find on your guitar, but it’s worth bearing in mind that we use a 32mm wide plate, which will be standard on 90% of Telecaster® styled guitars out there (there are other sizes, but they’re getting rarer and rarer by the day thankfully). When we talk about the assembly colour, the control plate is the main component of that, be it Chrome, Gold, Black or Nickel, it’s a steel plate, electroplated in the desired finish.
Knobs – This was a bit of a bone of contention when it came to customisation to be honest. It was very tempting to offer knobs in different colours to the control plate and screws, offer them in different styles, different sizes. To be truthfully, it was just too much choice sadly, so we’ve limited you a little bit here – depending on your choices when it comes to optional extras you’re either getting solid shaft, dome topped knobs with a position marker in the same colour as the Control plate.
Tip – Supplied with a Barrel switch tip as standard, but can be customised.
Fender®, Squier®, Stratocaster®, Strat®, Telecaster® and Tele® are registered trademarks of Fender Musical Instruments Corporation and Axesrus ® has no affiliation with FMIC
Please note – these assemblies are made to order, and as
such, come under the rules and regulations pertaining to
custom work in regards of returns.