Home > Pickup Parts > Humbucker Parts > Traditional > Bolts & Screws >

8 x Humbucker Height Bolts - #3-48 UNC
Humbucker Mounting bolts - Dome Head

Prices From: £4.80 Inc VAT


Thread Length:


Description Technical Specs
Full Thread, Phillips, Dome head bolts used to mount a humbucker through the pickguard or mounting ring.
Available in Chrome, Black,Nickel, Cosmo or Gold, in both 24mm and 30mm thread lengths
Sound Clips

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 2 Write a review »

  4 of 4 people found the following review helpful:
5 of 5 Correct Screw Information January 16, 2013
Reviewer: Matthew Cornwell from Dartford, Kent United Kingdom  
I lost a screw from my Shine Guitar Humbucker Pickup locator and ordered a set of these (Gold) in the hope they were the right ones.. The dimersions for the screw on the main page are slightly wrong which made me hesitant so here are some corrected sizes measured with accurate vernier;
Thread is #3-48
Thread thicknes = 2.42mm
Head size = 4.20mm
Thread length = 25.90mm
Total screw length = 27.56mm

The springs were different to my original springs but as I still had all my springs this was no issue. Sring size is;
Spring Length = 26.25mm (no tension)
Top ext. diameter = 7.15mm
Bottom ext. diameter = 5.50mm

I hope this helps some people because its hard to find a #3-48 screw in an inch length.

Cood luck, Regards Matt

Was this review helpful to you?

  5 of 5 people found the following review helpful:
4 of 5 Screws for EMGs September 13, 2012
Reviewer: Mick Duffin  
I ordered these 2.33mm screws off you and, yes, they do fit emg pickups(81 and 85) . Just thought I'd let you know incase someone else asked.

Was this review helpful to you?