"Tall & Open" Lipstick Pickup Cover For Fender® Telecaster®
With tall covers and tall poles, comes increased space internally for
copper - allowing you to wind a pickup to a respectable level with 42
AWG, or to use 1/4" poles with 43 AWG, or, just to go completely off the
rails and design something completely unique!
Please note, these are not official Fender® parts.
Prices From: £15.47 Inc VAT
Single Coil Pickup Covers - Vintage/Nylon
These pickup covers are faithful reproductions of the original Single Coil covers used in the early Stratocaster® - made from Nylon rather then the PVC found on later models, and with a much softer bevel on the outside edge giving them a slightly more rounded appearance.
Prices From: £14.00 Inc VAT
Lipstick Pickup Cover - for DiMarzio® Pickups for Telecaster® Necks
These are the style of covers that DiMarzio® fit to their pickups
designed to go into Telecaster® neck slots - slightly different to a
"normal" covers because they incorporate that "triangular" shape, and
flat top from a vintage cover (although the "shape" is much less
angular) but the cover is more "complete", like a modern version (where
the coils are completely surrounded by the cover)
Please note, these are not official DiMarzio® parts.
Prices From: £8.32 Inc VAT
1 x Pickup 'Cover' - for Fender® Jazzmaster® - Humbucker Conversion - Black
This is a "conversion" part - pretty straight forward really - its a humbucker ring internally, but the external "shape" is that of a Jazzmaster® pickup route.
Ideal if you've always wanted to drop a humbucker into your Jazzmaster® but dont fancy the hassle of replacing the pickguard.
Worth noting, that this will only work with uncovered humbuckers.
Please note these are not official Fender® parts, and the pickup and screws are not included in the price.
Prices From: £7.54 Inc VAT
Ground Plate - For Fender® Jaguar® Pickups
Pickups fitted to the Fender® Jaguar®, superficially at least, look very similar to normal single coils, but one of the important components that really shape their sound, is the steel grounding plate fitted underneath the bobbin.
Please note, these are not official Fender® parts.
Prices From: £6.55 Inc VAT
Lipstick Pickup Cover for Fender® Telecaster®
Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars. These covers have a curved top.
Please note, these are not official Fender® parts.
Prices From: £5.47 Inc VAT
Lipstick Pickup Cover For Fender® Telecaster®- Brass
Standard Lipstick neck pickup covers as seen on Telecaster® guitars. A great way to breathe a bit of life into your old guitars. These covers have a flat top.
Please note, these are not official Fender® parts.
Prices From: £5.47 Inc VAT
1 x Noiseless Single Coil "Gauss" plate
Noiseless singles are absolutely jam packed with propriety parts frankly
- but none of them are more important to the functionality then the
"Gauss" plate.
Please note, these are not official Fender® parts.
Prices From: £5.40 Inc VAT
Single Coil Pickup Surrounds
A great alternative to a pickguard for mounting single coil pickups in a guitar with that special finish
Prices From: £5.20 Inc VAT
(2)
Pickup Flatwork Set - For Staple P90
A pair of fiber boards to build Staple poled P90s - instantly
recognisable by those rectangular Alnico poles rather then the more
traditional slot head screws, these are for a very unique pickup.
Prices From: £4.92 Inc VAT
Single Coil Pickup Covers - 52mm
Single coil pickup covers, suitable for most Fender pickups, as well as DiMario, Seymour Duncan and Axesrus models - spaced 52mm center to center, to take a 5mm pole diameter.
Prices From: £4.66 Inc VAT
1 x Pickup Cover - for Noiseless Single Coils
These covers are specifically for our Noiseless single coils and their relevant parts - taller then a normal cover to accommodate the stacked pair of coil, but, really, doing the same job as any single coil cover - just a plastic cover to protect the pickup itself.
Prices From: £4.20 Inc VAT
1 x Flatwork set for a Humbucker Sized P90
A pair of Fiber boards for building up Humbucker sized P90s - perfect to
pair with our brass stand offs to create easy to use bobbins in
variable heights.
Prices From: £4.03 Inc VAT
Pickup & Switch Mounting Bolt & Spring Set - Suitable for Fender® Stratocaster®
This is a set of switch mounting and pickup height adjustment bolts for the Fender® Statocaster® and similar guitars.
Specifically,
these are 6-32 UNC (imperial thread) bolts, with dome, phillips heads,
with 6 "small" head screws for the pickups, and 2 larger headed versions
for the switch, as well as 6 height adjustment springs.
Prices From: £3.60 Inc VAT
Bridge Pickup Base Plates - Suitable for Telecaster®
These are the metal base plates found on most Telecaster bridge pickups - sometimes called grounding plates or Focusing plates, their primary function is to connect the strings to the ground loop of the guitar, but they do also have an effect on the pickups final tone.
Please note, these are not official Fender® parts.
Prices From: £3.55 Inc VAT