Please note - Loaded Pickguards come under the remit of Custom work and as always, if you've got any questions what so ever, please feel free to get in touch with us and we can talk through all the finer details of your proposed build.

Classic/Late 50s HSS Assembly

This is a HSS assembly for the Fender® Stratocaster®, built around our Classic humbucker and Late 50s Single coils - aiming to give a "best of both worlds" setup - not exactly "perfectly balanced" electrically, but tonally, its covering a huge amount of ground!

This assembly is specially designed so allow for pos 2 to avoid any strange phase cancellation common with HSS setups, and is supplied with master tone and master volume (a bit of a rarity with a Stratocaster®)

Built with CTS pots, an Axesrus Switch, Cornell Dubillier capacitor, switchcraft mono socket and vintage correct 22 AWG cloth covered wire.

currently only available in black.

Strings Ransom Specs
Resistance = 6k(+/- 5% )
Inductance - 2.8 Henrys @1Khz (+/- 5% )
Magnets = Alnico V
Pole Style = Staggered & light Bevel
Wire = .42 Gauge Formvar

Classic Humbucker Specs

Resistance - 7.7k (+/-10%)
Inductance - 4.8 Henrys @1Khz (+/- 5% )
Magnets = Alnico III (As Standard)
Wire = .42 AWG Plain Enamel

*Designs are subject to minor change without prior notice*

Controls Specs
500k CTS Pots
5 way Axesrus Switch
0.022 Orange drop cap
Switchcraft mono socket
22 AWG cloth covered wire
Master volume and master tone

Oak Grigsby, Axesrus and CRL switches require 35mm+ Routing Depth
Shallow bodied switch requires 29mm routing depth

Pickguard Spec

Pickup Route - Uncovered HB/SC/SC

Material/Composition - >85% PVC,<10% methyl methacrylate , <3% Organotin , <1% Bis (2-ethylhexyl), < 1% Pigment (Excluding bakelite plates)

Mounting Screw Config - 11 Hole Counter Sunk

Pickup & Switch Bolts - Dome Head

Weight - 95g

Sealed with a protective sheet.