Alnico 5 poles for our Staple pole P90s boards, covers and bases

A weird little magnet - made from C1/Y10T grade ceramic ferrite - and, honestly, not used for a whole lot nowadays - BUT - the have one historic point of note in history - this is the same spec of magnet used in the original Burns® Trisonics.

Specifically, 2 bar magnets are inserted into the space in the "air coil", adding "the charge" and making the whole pickup work.

These are the bar magnets commonly found in Gibson® firebird mini humbuckers - used as a magnetic pole within the bobbin, resulting in a very different tone.

One of the "oddity" sizes of bar magnet - sometimes turn up in P90s, sometimes turn up in Mini-buckers, very rarely, even in full sized humbuckers. As always, worth checking the sizes to make sure this is the one you need.

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4 and 5

58mm x 12.5mm x 3.2mm

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Humbucker and P90 sized Bar magnets, available in Alnico 2, 3, 4, 5, 6, 8 and ceramic

62mm x 12.5mm x 3.2mm

(1)

Oversized bar magnets usually turn up in 7 String humbucker, and are a fantastic way to get a really unique tone.

Oversized bar magnets usually turn up in higher output 7 string pickups, and are a fantastic way to get a really unique tone.

8 String Humbucker bar magnets, much longer then a standard magnet to cover the wider pole spacing.

Oversized bar magnets usually turn up in higher output pickups, and are a fantastic way to get a really unique tone.

Humbucker and P90 sized Bar magnets, available in Alnico 2 and Alnico 5

62mm or 58mm x 12.5mm x 3.2mm

This is the "reflector plate" that sits under the bobbins on a mini
humbucker which has bar magnet poles, as seen on the Gibson® Firebird.

Brass Standoffs, used to assemble fibre boards where the final pole piece, will be a 5/40 UNC threaded bolt - ideal of P90s.

Fat Rail Humbucker pole, supplied with M2 Mounting Bolts

Thin Rail Humbucker pole,

Steel rail pole to be used on a traditional build mini humbucker

Steel pole pieces for the "Dummy" coil on our stacked, noise cancelling single coils bobbins.

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 49.2mm, 50mm and 52mm.

Full threaded, Hex head pole bolts for humbuckers, available in Black and Nickel in M5 threads.

These poles don't really turn up all that often - probably the pickup that instantly comes to mind when you see them, is the Seymour® Duncan® Invader® if i'm being honest - i certainly cant think of anything other then that, and pickups that essentially copied the look!

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 57.6mm and 61.2mm

Steel bar for mounting humbucker pole screws efficiently against the magnet.
Available in 71.6mm

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Single Alnico Rods used for pickup manufacturing - suitable for Stratocaster, Telecaster, Jazzmaster and Jaguar guitar pickups, as well as P and J bass

Replacement bar magnets for single coil sized/Hot Rail pickups such as the Axesrus® TT series, DiMarzio® Fastrack line and similar pickups.