10.5mm Push In Machinehead Reducer Bushes

Home > Machine Heads > Parts and Screws >

6 x Machine Head Bushes - Reducers

10.5mm Push In Machinehead Reducer Bushes

Alternative Views:

Prices From: £10.67 Inc VAT

Colour*:

Qty:

Description

Technical Specs

6.3mm shaft hole x10.5mm wide Splined Push in Reducer Bushes for 6mm Machine head posts. PER 6 Available in Chrome, Black, Nickel and Gold (Flat Top)

Average Rating: Average Rating: 4.5 of 5

4.5 of 5 Total Reviews: 2 Write a review »

1 of 1 people found the following review helpful:

Compatibility	April 16, 2025
Reviewer: Joe from Staffordshire

I bought these specifically for my Gold Gotoh SD-91 Tuners (which are notoriously hard to find 10mm bushes for). As predicted, they did not fit over the machine head stem/shaft at first. Luckily a quick email and the guys at Axesrus drilled another set of bushes to widen them slightly. They dispatched them within the same hour and fit perfectly, saving me Â£10+ on actual Gotoh bushes. Absolutely superb service, I have never been let down by Axesrus.

-EDIT from Craig @ Axesrus in 2025 - this review is from 2012, we no longer offer to drill out the metric reducer bushes to accept imperial posts, and carry the Gotoh bushes mentioned in the review.

Was this review helpful to you?

1 of 1 people found the following review helpful:

nearly perfect but be careful with the size	January 1, 2014
Reviewer: Patrick Green from Colchester, Essex England

I intended these bushes for 10 mm dia tuner holes and a 1/4 inch post tuners on some US tuners. (Waverley) The bushes are very good quality and robust but when the description says 6.3 mm it won't quite fit a 1/4 inch (6.4mm) post even though the waverley spec gave the post dia as 1/4 inch and 6.3 mm. I think there is some confusion over conversion here. Anyway this is not a problem as it took me less than 10 minutes to open them up with an old reamer I have. They are now installed and look and work fine.

Was this review helpful to you?


Mini Humbucker Base Plate - Suitable for Staple Pickup	Single Coil Size Humbucker - Fibre Board base	1 x P90 Cover - Soap Bar - German Silver/Nickel - Open	Humbucker Covers - 7 String (No holes)
£3.30 Inc VAT	£1.80 Inc VAT	£17.71 Inc VAT	£11.45 Inc VAT