Home > Electronics & Wiring > Wiring Kits >

Wiring Kit - for PRS® w/2 Pots & Lever Switch
Axesrus -  PRS SE 2 control wiring

Prices From: £39.30 Inc VAT

Quantity in Stock:(Out of Stock)


Wiring - Extras

Switch Tip (optional):

Description Technical Specs
This is a Wiring kit designed for as an upgrade, primarily, for PRS® SE (and other models produced in the far east) with 1 Volume and 1 Tone controls, and a 3 way toggle switch.

Obviously, there are other guitars out there that this kit will be suitable for - so its worth noting a few of the features that make it what it is.

The pots are Metric (8mm Diameter) threads (where guitars produced in the USA will be 3/8" Imperial threads).
The switch is on the lower half of the guitar, and as such, you're buying 90cm of metal braided hookup wire.
The switch is a toggle, NOT a lever switch.

This kit is a considerable upgrade over the stock parts found on most far eastern guitars, using Metric CTS pots (500k Log for Volume, 500k Linear for Tone), Switchcraft toggle and Mono Socket, Cornell Dubillier capacitor (0.022 @ 100v) and 22 AWG Vintage cloth wire with a metal braided screen.

Please note – these are not official Gibson® Epiphone® or PRS® parts

Share your knowledge of this product. Be the first to write a review »