Home > Bridges & Tremolos > Tremolos > Spare Parts > Tremolo Arms
Sort By:
Page of 1
Gotoh M5 Tremolo Arm Gotoh® M5 Thread Tremolo Arm - Chrome w/ Tip

Steel Tremolo Arm with a 5mm metric thread, used on the Axesrus 56.4mm Steel Block Trems, the 54 and 56.4mm Zinc and Steel block trems, and the Fender® Mexican zinc block tremolos, as well as many other tremolo systems produced outside of the USA.

Please note, these are not official Fender® parts.

Prices From: £7.63 Inc VAT

(2)
Gotoh 10/32" Thread Tremolo Arm - Chrome w/ Tip Gotoh - 10/32 Thread Tremolo Arm

Steel Tremolo Arm with a 10/32" Imperial thread, used on the Fender Vintage® Tremolo( 099-2049-000 ), the Gotoh GE101TS and many other trems either built in the USA, or to those all important "imperial" specifications.

Please note, these are not official Fender® parts.

Prices From: £7.63 Inc VAT
Wilkinson VS50mkII Tremolo Arm Wilkinson VS50mkII Tremolo Arm

Simply a case of dropping the arm into the hole and then screwing it onto the small protruding screw in the block. Nice and simple.

Available in Brushed Satin Chrome

Prices From: £6.50 Inc VAT
Wilkinson VS50 Push in Tremolo Arms Wilkinson VS50 Push in Tremolo Arms

Available in Brushed Satin Chrome or Brushed Gold.

Simply a case of dropping the arm into the hole on the VS50, then tightening the hex bolt at the back to keep it in place.

Prices From: £6.50 Inc VAT
Axesrus® M5 Thread Tremolo Arm - Chrome w/ Tip Axesrus® M5 Thread Tremolo Arm

Steel Tremolo Arm with a 5mm metric thread, used on the Axesrus 56.4mm Steel Block Trems, the 54 and 56.4mm Zinc and Steel block trems, and the Fender® Mexican zinc block tremolos, as well as many other tremolo systems produced outside of the USA.

Please note, these are not official Fender® parts.

Prices From: £5.04 Inc VAT
Right Handed Pop in Whammy Arm Pop in Tremolo Arm

About 5mm at the trem end, simply force the ball end into the cavity and through a washer where it will hold. No need for hex keys or threads.  Available in Chrome, Gold and Black Only in Right handed

Prices From: £4.50 Inc VAT
Right Handed Tremolo Arm - No Tip 5.7mm thread Right Handed Tremolo Arm - No Tip M6 thread

Right Handed, Thick thread Whammy Arm - No Tip

Available in Chrome, Gold and Black M6 External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the theaded hole in the block.

Prices From: £4.50 Inc VAT
Right Handed Tremolo Arm - 5.7mm Thread Right Handed Tremolo Arm - M6 Thread

Usually for Thin Block Tremolo's

Available in Chrome, Gold and Black

5.7mm External thread. Should be a good replacement for any thin block trems, as well as many imports. Simply Screws into the threaded hole in the block.

Prices From: £4.50 Inc VAT

(1)
Left Handed Tremolo Arm - 5mm Left Handed Tremolo Arm - 5mm

5mm External thread. Should be a perfect replacement for most vintage USA trems, as well as many imports. Simply Screws into the threaded hole in the block. M5 thread
Available in Chrome

Prices From: £4.50 Inc VAT
Wilkinson Push in Trem Arms Wilkinson Push in Trem Arms

Simply a case of dropping the arm into the hole on the Trem, then tightening the hex bolt at the back to keep it in place. 5mm at the trem end.

Available in Gold w/Black Tip, Chrome w/White Tip or Black w/Black Tip.

Prices From: £4.50 Inc VAT
A selection of tips for tremolo arms 1 x Whammy Bar Tips

Fits both push on and screw on arms.

Prices From: £3.00 Inc VAT