Home > Pickup Parts > Humbucker Parts
Pick a Type:
7 & 8 String Active Rail Type
Traditional Wide Range All Parts
Sort By:
Page of 3
Modern Wide Range humbucker parts kit Humbucker Parts Kit - Wide Range "Modern"

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M5 poles, rather then the M3 poles found on the "traditional" humbuckers - this is an important consideration on nailing that modern Wide Range tone.

Prices From: £31.44 Inc VAT
"Rail Humbucker" Bridge Parts kit - Suitable for Telecaster "Rail Humbucker" Bridge Parts kit - Suitable for Telecaster®

This is a full kit to make one Rail Humbucker pickup, suitable for the bridge position on a Telecaster®, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £30.00 Inc VAT
Wide Range humbucker parts kit Humbucker Parts Kit - Wide Range "Conversion"

This is a kit including everything you'll need to wind a traditional humbucker that will fit into the Wide Range routing found on the Telecaster® Deluxe, Custom and the Starcaster® - importantly, with M3 poles, rather then the M5 poles found on the "modern" version - this is a way to get a traditional humbucker tone from a Wide range route, NOT a way to get a modern wide range tone.

Prices From: £28.36 Inc VAT
"Rail Humbucker" Parts kit - Suitable for Single Coil Routes "Rail Humbucker" Parts kit - Suitable for Single Coil Routes

This is a full kit to make one Rail Humbucker pickup, suitable for any single coil route, containing everything you'll need except the copper winding wire and the hookup wire.

Please note, these are not official Fender® parts.

Prices From: £26.40 Inc VAT
Humbucker Sized P90 Pickup Parts Kit Humbucker Sized P90 Pickup Parts Kit

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a Humbucker sized P90!

Prices From: £24.50 Inc VAT
Hot Rail Humbucker Kit - Fat Rail "Fat Rail" Humbucker Parts kit

Our Fat Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

Prices From: £24.00 Inc VAT
Humbucker Pickup Parts Kit - 8 String Humbucker Parts Kit - 8 String

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Prices From: £22.36 Inc VAT
Humbucker Pickup Parts Kit - 7 String Humbucker Parts Kit - 7 String

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Prices From: £19.96 Inc VAT
Humbucker Pickup Parts Kit - Vintage Spec Humbucker Parts Kit - Vintage Spec

This kit is a little more restircted then out normal humbucker kit (where you can pretty much build anything you can dream up!) - and that's completely intentional. This kit is designed to replicate one of the original humbuckers, warts and all.

So please bare in mind, that this kit only comes with the long leg bases, 5-40 UNC bolts, 6 screw poles, 6 slugs, and a base to accept them (the holes in the base are threaded for the pole screws) - its also only available in the 49.2mm spacing, as correct for the period.

Prices From: £19.80 Inc VAT
Hot Rail Humbucker Kit - Fat Rail "Thin Rail" Humbucker Parts kit

Our thin Rail humbucker kit - ideal if you want to wind something very hot, very heavy, and VERY hifi!

Prices From: £19.39 Inc VAT
Humbucker Pickup Parts Kit Humbucker Parts Kit

We're proud to finally be able to offer a DIY kit containing all the vital elements required to build a humbucker!

Prices From: £18.36 Inc VAT
Axesrus Wide Range humbucker Covers Wide Range Humbucker Cover - German Silver / Nickel

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £14.90 Inc VAT
Humbucker Cover - German Silver with no copper 1 x Humbucker Cover - Vintage/Traditional (No Copper)

These covers are identical to our "normal" humbucker covers, with one weird difference.

Where a "normal" modern cover is the "colour" electroplated onto a thin layer of copper, which has been electroplated onto the base material (simply to give a higher quality finish - copper being more reactive then either brass or nickel)

Prices From: £9.36 Inc VAT
Open Frame Humbucker Cover - German Silver / Nickel 1 x Humbucker Cover - "Black Top"

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £8.98 Inc VAT
Open Frame Humbucker Cover - German Silver / Nickel 1 x Humbucker Cover - Curved Open Frame

Please be aware, these are a curved humbucker cover, and will no fit into standard humbucker routes or rings.

They are also brass (where we normally use Nickel for all of our humbucker covers by preference)

Prices From: £8.98 Inc VAT
Humbucker Pole - Fat Rails 1 x Humbucker "Fat Rail"

Fat Rail Humbucker pole, supplied with M2 Mounting Bolts

Prices From: £8.18 Inc VAT
Set - Metal Diecast Archtop Humbucker Rings for Open Faced Humbuckers. Set - Metal Diecast Archtop Humbucker Rings for Open Faced Humbuckers.

Set - Metal Diecast Archtop Humbucker Rings for Open Faced Humbuckers.

Prices From: £8.00 Inc VAT
Humbucker Cover - German Silver / Nickel 1 x Humbucker Cover - "Tall" Traditional

Where normal humbuckers are 16mm high, these German silver/Nickel models are actually 19mm tall - ideal for accommodating either taller magnets, or taller bobbins.

Prices From: £7.78 Inc VAT
Open Frame Humbucker Cover - German Silver / Nickel 1 x Humbucker Cover - Open Frame

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Sizd P90 Cover - German Silver / Nickel 1 x Humbucker Sized P90 Cover

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel - 3x3 Screw Pole 1 x Humbucker Cover - 3x3

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel - Closed 1 x Humbucker Cover - Closed

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel - 11 Gate 1 x Humbucker Cover - 11 Gate

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel - 12 Screw Pole 1 x Humbucker Cover - 12 Hole

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel - H Gate 1 x Humbucker Cover - H Gate

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT
Humbucker Cover - German Silver / Nickel 1 x Humbucker Cover - Traditional

Standard style German Silver / Nickel humbucker covers, plated to the highest standard.

German silver (sometimes called Nickel (not to be confused with the plating )) is most often seen on very high spec Humbuckers, where the addition of a cover is intended to alter the final tone as little as possible. The properties of Nickel make it one of the best materials to achieve this.

Prices From: £7.78 Inc VAT

(3)
"Slanted" Humbucker Ring 1 x "Slanted" Humbucker Ring - For Gibson® Nighthawk®

Slanted humbucker mounting rings, suitable for the Gibson® and Epiphone® Nighthawk® - where the bridge pickup is slanted off to a pretty steep angle.

Prices From: £5.54 Inc VAT
A Modern Wide Range Humbucker Base Plate in Nickel with 53.3mm String Spacing 1 x Wide Range Humbucker Base - Nickel - 53.3mm - "Modern"

Modern Wide Range Humbucker Base Plate
Available in 53.3mm.

Prices From: £5.52 Inc VAT
Black, Chrome and Gold Hot Rail pickup Poles 2 x Single Coil Sized Humbucker Rail Poles (Flat)

Replacement Rails for Pickups such as the Axesrus TT series, but now slightly wider and completely flat across the top - ideal for wider string spacings, or flatter radius necks.

Prices From: £5.38 Inc VAT
Black, Chrome and Gold Hot Rail pickup Poles 2 x Single Coil Sized Humbucker Rail Poles (Curved)

Replacement Rails for Pickups such as the Axesrus TT series, and DiMarzios Fast Track line

Prices From: £5.38 Inc VAT