Home > Electronics & Wiring > Control Looms > For Gibson® & Epiphone® >

Wiring Loom

High Spec CTS Arch Top Wiring Loom - Long Shaft

Prices From: £68.00 Inc VAT

Availability:: Usually Ships in 3-5 Working Days.



Description Technical Specs Wiring / Instructions / Customisation
Untitled Document

Les Pau® l- Wiring

This is a wiring loom designed to fit into a Gibson® Les Paul® - and that’s pretty specific too – only a Gibson® - not an Epiphone®, not a Vintage® or an ESP® -the pots needed for a full fat Gibson® are much longer than the ones you’d use in anything else to accommodate for the thicker top panel - so its worth bearing that in mind ( there is a loom suitable for Import LPs here though). Just like all the other looms, its built here in the UK to order using CTS pots, Switchcraft socket and switch, 22 AWG waxed cloth wire with the braided external screen and Cornell Dubliner (formerly Sprague) “Orange Drop” capacitors – all in all, about the highest stamp of parts that are available on the market.

Les Paul® guitars are the real master of ceremonies when it comes to Gibson® guitars – they’re the one that started it all, they’re the one that still draws the crowd, and they’re the one that inspired almost every single subsequent guitar electrically– 4 controls, 2 volume, 2 tone, toggle and a mono output – and this loom will work perfectly with both Humbuckers and P90s – which just about overs every LP you’ll see.

So with that in mind, we’re making this pre-assembled loom up as a drop in replacement or upgrade for your guitars – dead easy to fit, just attach the pickups to the respective volume pot, connect the ground wire from the bridge to the ground loop - and your away – everything else has been done for you.

Please note with these sort of looms – most of the time, you will have to remove the switch from the loom to feed the wires through the cavities – not a huge job, and we colour code everything so it’s very easy to re-connect at the other end.

Technical Brief

500k Pots (Linear Tone, Logarithmic Volume), 3 way toggle, mono output, 0.022 capacitor, wired to the "modern" standard

Please note – these assemblies are made to order, and as such, come under the rules and regulations pertaining to custom work in regards of returns.

Also note – these are not official Gibson® or Epiphone® part

Share your knowledge of this product. Be the first to write a review »