Home > Bridges & Tremolos > Hardtails > Axesrus®
Pick a Type:
Ferrules Saddles and Parts
Sort By:
Page of 1
Vintage Ferrules - Smooth Edge 1 x - String Ferrule - Japanese Size

Slightly larger then the Ferrules seen on guitars from the USA, Korea
and China - with a diameter of 9.5mm, a length of 9.5mm and lacking the
characteristic lip of "normal" ferrules - they turn up fairly often on
Japanese Fender® Telecaster® guitars, but in all likelihood turn up on
other makes and models too.

Prices From: £1.34 Inc VAT
A set of 6 Luthiers Hex Keys Luthiers Hex Keys

1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm, + Plus 1 Fender®  saddle adjuster

Prices From: £2.20 Inc VAT
Bullet Ferrules Ferrules - Bullet

These "bullet" ferrules are a slight departure from the original version of the 50s and 60s. They initially debuted as a companion part to a set of strings in the mid 70s and more commonly seen on hard tails.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £4.50 Inc VAT
Vintage Ferrules - Knarled Edge Ferrules - Knarled Edge

The Knarled Edge ferrules turn up fairly often on guitar made in the far east rather then in the USA (which seem to use the Smooth edged version with more regularity) - exactly the same principle but the knarlled edge have "teeth" around the barrel section to help them grip the body more efficiently.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £5.00 Inc VAT
Vintage Ferrules - Smooth Edge Ferrules - Smooth Edge

Ferrules are a fairly basic piece of hardware once you look into them; they are simply small metal “cups” which hold the ball end of the string in place as it is fed through the back of the guitar.

The advantages compared to a “string though top” setup are pretty wide ranging, but the main attraction is that they allow the strings movement to resonate more efficiently through the wood of the guitars body, giving a much more honest tone to the sound, really emphasising that classic Tele® snap and twang that has proven so popular in recent decades.

Suitable for a Telecaster® and Hardtail Bridges

Prices From: £7.90 Inc VAT
Hard Tail Bridge with Vintage saddles on a Vintage Base Axesrus "Vintage" Hardtail

One of our Hardtail Bridges, 3 mounting holes, vintage steel saddles - nice and basic

Prices From: £11.04 Inc VAT
Hard Tail Bridge with I saddles on a Hip Shot Base Axesrus "Lipped" Hardtail

Our lipped Hardtail, string through body, 6 mounting holes, big and chunky throughout.

Prices From: £12.50 Inc VAT
Hard Tail Bridge with I Saddles (Top Loader) Axesrus "Top Loading" Hardtail

Top mounting Hardtails are a bit of a rarity, but we carry this one just incase.

Prices From: £13.22 Inc VAT
Hard Tail Bridge with I saddles on a Vintage Lipped Base Axesrus "Flared" Hardtail

A Great looking Bridge with a String through Body configuration. Makes the fitting a little more tricky, but the eventual playability is great. All mounted on an eye catching, Vintage style base plate.

Prices From: £13.26 Inc VAT
Hard Tail Bridge with I saddles on a Trapazoid Base Axesrus Hardtail - Suitable for Gibson® Nighthawk®

A clever Hard tail Bridge with a String through Body configuration. Makes the fitting a little more tricky, but the eventual playability is great. All mounted on an eye catching, and individual base plate.

Prices From: £15.44 Inc VAT
Axesrus Cutdown Bridge - Suitable for Telecaster® Axesrus "Cut Down" Bridge - Chrome

This is a bit of an obscure one to be honest – it’s a bridge built to mount to a vintage Telecaster®, or guitars built in that style, but rather than incorporating the pickup mounting on the bridge plate, this is the cut down version, so it’s much shorter, allowing you to do whatever you fancy in the space infront of it.

All in all, its about 50mm shorter, so that’s plenty of room for a humbucker and its mounting ring, or a big old P90 if such a thing tickles your fancy!

Suitable for a Telecaster® or Similar with 4 screw bridge

Prices From: £37.62 Inc VAT