We are pleased to offer this assembled wiring loom, fitted directly to a plate, suitable for an Fender® Custom® .
Built in-house using high quality parts, the classic black pickguard comes fitted four 500k short, solid shaft CTS pots, two 0.022 orange drop capacitor, A switchcraft toggle switch* and mono socket, and its all wired up wiring metal braided, wax cloth hookup wire.Finished under a set of black witch hat knobs and a black switch tip.*With the Tele® Custom®, its worth nothing, that there is some variation when it comes to the bodies - whilst some of it is period dependent (this guard is specifically for the re-issues, not the originals, which have a slightly different humbucker placement) - there is some confusion when it comes to the switches.Basically, the bodies are either routed for a shallow, angled switch or a deeper, straight switch. As a general rule of thumb, Fender® Bodies are designed to take the angled switch, and all "after market" and licensed bodies, are designed to take the straight switch.Squier® muddy the waters slightly, because some are routed for the angled switch, some for the straight - but as with all guitars, its worth checking.
Please note – these assemblies are made to order, and as such, come under the rules and regulations pertaining to custom work in regards of returns.These are not official Fender® parts.