Secured by PayPal


Home > Bargain Basement
NO RETURNS ON BARGAIN REDUCED ITEMS  


RETURNS, USED, REPAIRED, END OF LINE,ASSORTMENT OF PARTS AT KNOCKDOWN PRICES.,HAPPY HUNTING..NO RETURNS ON THESE ITEMS..WE TRY TO DESCRIBE AS BEST WE CAN.
Sort By:
Page of 1
Axesrus "Daddy-O's" Single Coil Pickups - Set Axesrus "Stacked " P90s BS108 Tremolo
Prices From: £50.00 Inc VAT

(3)
Prices From: £32.00 Inc VAT
Prices From: £26.00 Inc VAT
Axesrus "Daddy-O's" Single Coil Pickups Axesrus "Stacked " P90s BS108 Tremolo - Thin Block - Black

The Daddy-Os are easily one of our favourite single coils in the office – they were initially designed to recreate that iconic 1950s Single Coil tone as accurately as possible, and to do this, we used the same magnets, the same bevels, the same wire, the same insulation – everything is 100%identical to the original – and we’re happy to say they deliver tonally too. What initially started as an exercise in historical re-creation eventually yielded one of the sweetest sounding “clean“pickups we’ve ever made.

Available in Chrome, Gold and Black A modern style trem fitted with roller saddles. Designed to limit string friction, meaning the guitar should stay in tune after use of the whammy bar.

Supplied with Studs, Bushes, Trem Arm, Springs, Screws, Claw and Hex Key.
Axesrus "Knee Jerk - Basic" Humbuckers Axesrus "Toasters" Surface Mount Pickups Axesrus "Classic 50s" Humbuckers
Prices From: £25.00 Inc VAT

(2)
Prices From: £25.00 Inc VAT
Prices From: £25.00 Inc VAT

(4)
Axesrus "Knee Jerk - Basic" Humbuckers Axesrus "Toasters" Surface Mount Pickups Axesrus "Classic 50s" Humbuckers
The Knee Jerk humbucker represents an affordable solution for anyone looking for that classic PAF sound, but who just can’t justify the expensive historical recreations.

Harking back to a simpler time, these really are a no nonsense pickups. Both neck and bridge up at the same resistance up in that sweet spot between 7k and 8k, they’ll take whatever you can throw at them, from pop through to hard rock and every thing in between.

They’re built around a slightly weakened Alnico 2 bar magnet, lending the setup a sweet, almost spongy tone, with a pronounced top end. They’re ideally suited to rhythm work, but with plenty of bite in the top end. Just enough so they hold their own when needed for riffs or solos.
Granted, Toasters aren’t humbuckers, they’ve got more akin to single coils and P90s then anything else, but they seem to fall under the Mini Humbucker bracket when it comes to labelling pickups

You’re basically looking at a hot, twanging, rich tone, with a certain amount of bite in the top end, with a healthy dose of thumping bottom end. The middle will be slightly scooped, resulting in a strong overall feel to the pickups.

Perfectly suited to Country, Blues and Light Rock.
Heres a set of pickups were very proud of - combining modern build techniques with vintage ideas to create a brilliant sounding humbucker. The bridge is short, sharp and barks real character, where the neck is big, bright and brassy.

Built using the often overlooked Alnico III magnets, the magnetic field is slightly weaker, but dont read this as a negative! These delicate magnets give better sustain, better highs and more control over the low end, very similar to true 50s humbuckers.
Wilkinson "MP90" P90s Artec Sounds P90s Tulip Head 135 Mount Machine Heads
Prices From: £22.00 Inc VAT
Prices From: £21.00 Inc VAT
Prices From: £19.00 Inc VAT
Wilkinson "MP90" P90s Artec Sounds P90s Tulip Head 135 Mount Machine Heads
A traditional set of P90s, in Chrome or Gold Slightly smoother then you'd expect for a P90, but the combo really works. Great for soft rock and country, now available with plastic, metallic painted covers (all the looks, none of the draw backs) A traditional set of P90s, in various colours, mounted to a dog ear style cover. Big brashy and hot on both accounts.

15mm high 118.5mm lenth 42mm wide
135 Mount Machine Heads with a Metal Head and a Single hole Post. Mounts using a 5 o'clock Screw Mount. Unbranded, Reliable Machine Heads.
Wilkinson "MW90" P90s G and B G111 Dog Eared P90s Axesrus Chicago Machine Heads
Prices From: £19.00 Inc VAT
Prices From: £18.00 Inc VAT
Prices From: £17.00 Inc VAT
Wilkinson "MW90" P90s G and B G111 P90s Axesrus Chicago Machine Heads
A traditional P90, in cream with Chrome screws. Slightly smoother then you'd expect for a P90, but the combo really works. Great for soft rock and country. A traditional set of P90s, in Black with Chrome Screws, mounted to a dog ear style cover. A Slight Variation on the Tried and Tested Vintage Style, Now with a
fitted Metal Button Head.Great for adding that little bit of class to a
guitar.
Axesrus Vintage Bridge 1963 - Modern Pickguard - Double Single coil Conversion - Spec 1 Axesrus Vintage Bridge w/ Six Saddles
Prices From: £16.50 Inc VAT
Prices From: £16.00 Inc VAT
Prices From: £15.50 Inc VAT
Axesrus Vintage Bridge 1963 - Modern T Style Pickguard - Double Single coil Conversion - Spec 1 Axesrus Vintage Bridge w/ Six Saddles

Our own take on the “classic” vintage Bridge, a hybrid between the tonality of the very earliest models seen in the 1950s, but with the more reliable stringing of the 1968 – 1983 version thanks to the grooved saddles.

A slight twist on the classic Nashville plate, we’ve widened out the pickup slots to take 2 single coils. This really does give you the best of both worlds when it comes to tonal options.

A perfect fit for our Spec 1 control plates.

Available in the following colours

Black White Pearl

Our take on the short lived Vintage 6 Saddle Bridge, offering unrivalled action and intonation alterations compared to the 3 saddle version.

This is based around a bridge initially seen on the Custom models in 1972, but we’ve tried to aim this bridge at a wider audience looking to get more precision from their guitar, notably providing “String through body” and “String through top” stringing options.

1963 - Modern Single Coil Conversion Pickguard- Spec 1 - Left Handed 1963 - 1988 Pickguard - Left Handed - Spec 1 4 Ply Paisley Pickguards.
Prices From: £14.00 Inc VAT
Prices From: £13.00 Inc VAT
Prices From: £10.00 Inc VAT
1963 - Modern T Style Single Coil Conversion Pickguard- Spec 1 - Left Handed 1963 - 1988 T Style Style Pickguard - Left Hand - Spec 1

Another of the popular conversion plates that we’re trialing, where the classic Lipstick pickup in the neck slot has been replaced by a slightly larger, livelier sounding single coil.

A perfect fit for our Spec 1 control plates.

Available in the following colours

Following on from the gradual phase out of the 5 hole config in 1959, the 8 hole setup has pretty much lasted the test of time to the modern day.

Initially created to combat the warping seen on early plates.

Available in the following colours

Available in a Selection of Paisley Presses.

At Axesrus we Strive to find Guitar Parts for the Idividual, and we are very pleased to offer these "Paisley Press" Pick Guards. The pattern is a Metallic fabric pressed between a regular pick guard.A really Distinct, Quality Part

11 Hole Configuration, Sealed with Protective Sheet.
Import Type Pickguard Early 60s Fat Type Pickguard Pickguard cut for Dual hot or Power Blades.
Prices From: £9.00 Inc VAT
Prices From: £9.00 Inc VAT
Prices From: £8.00 Inc VAT
Import S Type Style Pickguard in Black and White Early 60s Fat S Type Pickguard in Tortoise Shell, White Pearl, Mint, Aged white, Parchment and Black, Black Pearl,Red Pearl, Green Pearl, Cream Pearl and Blue Pearl 3 Ply.
Notably differing from standards set by most USA versions (most likely due to legal stipulations) in both overall shape and screw positioning. “Import” plates are most commonly seen on copies of famous guitars.


Available in the following colours.
White
Another of the “modification plates” that have been seen through the years, where an early 60s plate has been changed to take a humbucker in the bridge.
Available in the following colours
Black Pearl Blue Pearl Green Pearl Mint Parchment Red Pearl White Pearl
Available in Parchment

11 Hole Configuration, No Eclipse, Sealed with a Protective Sheet.
Aluminium Quick Release Capo 1963 - 1988 Humbucker Conversion Pickguard- Spec 1 1963 - 1988 Pickguard- Spec 1
Prices From: £6.50 Inc VAT
Prices From: £6.00 Inc VAT
Prices From: £6.00 Inc VAT
Aluminium Quick Release Capo 1963 - 1988  Humbucker Conversion Pickguard- Spec 1 1963 - 1988 T Style Pickguard- Spec 1
A strong, well protected Capo for electric and acoustic guitars.

Available in Red or Black.

A great twist on the classic design, with a standard sized humbucker in the neck slot,
A perfect fit for our Spec 1 control plates.

Available in the following colours

Aged White (Cream) Black Pearl Green Pearl Mint Red Pearl Tortoise Shell White

llowing on from the gradual phase out of the 5 hole config in 1959, the 8 hole setup has pretty much lasted the test of time to the modern day.

Initially created to combat the warping seen on early plates.

Available in the following colours

Aged White (Cream) Black Black Pearl Blue Pearl Green Pearl Leopard Print Red Pearl Tortoise Shell White Pearl Yellow Marble

Metal control Horn Axesrus P90 Pickup Cover - Metal - Dog Ear 3 Ply Bass Pick Guard
Prices From: £6.00 Inc VAT
Prices From: £5.50 Inc VAT
Prices From: £5.00 Inc VAT
Axesrus P90 Pickup Cover - Metal - Dog Ear
64mm (Widest), 120mm (Longest), drilled for 3 pots, 1 jack. Supplied with Screws.

Axesrus P90 Pickup Covers - Metal - Dog Ear

Available in  White pearl.

Please Note - Will require some light modification to fit
Viva Plastic Capo Medium Shaft CTS Pots - Split Shaft
Prices From: £4.50 Inc VAT
Prices From: £4.30 Inc VAT

(5)
Viva Plastic Capo Medium Shaft CTS Pots
An affordable, quick release capo desgined for those looking to cut their teeth with this clever tool.Clear rubber pads on all the touching elements that are in contact with the neck, and a good strong spring to give good contact on the strings. Medium shaft pots are ideal for guitars where the pots are wooden top panel.

Please note - these are a discontinued line (only 250k Lin, 300k Audio & Lin and 1 Meg Audio & Lin available)

They are being replaced by the all brass version, where all tapers and resistances are available

Supplied with 1 Mounting Nut, 1 Washer and 1 "Star" washer