Artec Sound Alpha A/C500k Blend Pot with Terminals. Great for panning between pickups. Very Versatile Part.

Central indent is 70% from both pickups, and panning left and right decreases the output from the opposite pickup whilst increasing the "selected" pickup.

Supplied with 2 Nuts and Washer.

Great little pots for use with on board effects. Combine Tone and Volume into one. Basically, two pots in one body.

1 3/4" Total Shaft Length

Available in 500k

Supplied with Gold, Chrome or Black Knobs,2 Nuts and Washer.

Great for acoustic basses or as a way to get a different sound from electrics.

Easy installation with any Passive or Active pickups in your Guitar or Bass (no mods , as it just replaces one of your tone pots)

Gives 4 settings to Cut the top end of your guitars sound, ranging from a mid and treble roll off, through to a very acute top end cut, giving your guitar a new lease of life. The 5th setting is a passive bypass, giving you back your trusty axe whenever you want it. Great for the guitar player who likes their sound darker, sounds good when distorted.

Passive, only minimal power draw supplied by Amplifier.

6 seperate sensors, ideal for 6 or 12 string guitars.

The A1 Piezo is designed to catch the full, natural resonance of your acoustic by simply mounitng it to the external Or Internall face of the guitar. Simply turning the vibrations into an electrical signal that can be whacked into an amplifier and played as normal. No drilling required.

Piezo Pickup Kit, supplied with Battery box, Jack socket, pre-amp and fixings.

Designed to offer a clean, full bodied sound without too much treble. Great for getting that little bit extra out of your old acoustic.

Can be used with a piezo and a soundhole pickup.

Requires a 12mm hole drilling in the guitar body for fitting and the maximum thickness of body is 21mm.
A small hole is also required  through the bridge in order to fit the piezo pickup.

Acoustic Pickup with Built in Pre-Amp End Pin, supplied with Battery.

Acoustic Pickup with Built in Pre-Amp End Pin, supplied with Battery.